SB300 Series
SB300 Series
SB300-C Dispense Valve: This model features a high-pressure 'snuff back' mechanism and uses a special carbide rod with lip seals to resist wear. It is ideal for dot dispensing, gasketing, filling, and potting.
SB300 Dispense Valve: The standard SB300 model is suitable for less aggressive fluids without fillers, such as RTV, silicone, sealants, adhesives, gels, and pastes. It comes with a tool steel rod.
Key Features of SB300-C:
- Flow rates over twice that of FC300 Series Valves
- Adjustable snuff back shutoff
- Stainless Steel fluid body
- Low maintenance design
- Interchangeable outlet options: Luer or female NPT
Specifications:
- Dimensions: 38mm x 38mm x 152mm (1.5” x 1.5” x ~6.0”)
- Weight: 510g (18oz)
- Operating Air Pressure: 60-100 psi (4.1-6.9 bar)
- Maximum Fluid Pressure: 1000 psi (69 bar)
- Wetted Components: Carbide, Stainless Steel, Viton®, Urethane, Nylon (Steel Rod Optional for SB300)
- Inlet: 1/4” NPT Female
- Outlet: Male Luer-LockTM Adapter (1/4” NPT Female Optional)
Contact Information: For more details, contact PVA at [email protected] or visit their headquarters at 6 Corporate Drive, Halfmoon, NY 12065. Phone: +1 518 371 2684, Fax: +1 518 371 2688, Website: www.pva.net
Catalog excerpts
INNOVATION. PRECISION. EXCELLENCE. Valve Specifications Dimensions 38mm x 38mm x 152mm (1.5” x 1.5” x ~6.0”) Weight 510g (18oz) Operating Air Pressure 60-100 psi (4.1-6.9 bar) Maximum Fluid Pressure 1000 psi (69 bar) Wetted Components Carbide, Stainless Steel, Viton®, Urethane, Nylon (Steel Rod Optional, SB300) Inlet 1/4” NPT Female Outlet Male Luer-LockTM Adapter (1/4” NPT Female Optional) High Flow Dispense Valve SB300-C Dispense Valve The SB300-C is a high pressure “snuff back” dispense valve that is designed for applying medium to high viscosity fluids, including thermally conductive pastes and gap fillers, which contain aggressive fillers. A special carbide rod is used in combination with lip seals to resist wear against aggressive fillers, making this valve suitable for applications including dot dispensing, gasketing, filling and potting. SB300 Dispense Valve For less aggressive fluids, without fillers, such as RTV, silicone, sealants, adhesives, gels and pastes the (standard) SB300 Dispense Valve is available with a tool steel rod. The SB300-C features include: • Achieves flow rates over 2x higher than FC300 Series Valves • Adjustable snuff back shutoff • Stainless Steel fluid body • Low maintenance design • Interchangeable outlet – Luer or female NPT For more information, please contact PVA at [email protected] or contact your local representative. Luer-LokTM is a Becton Dickinson and Co. trademark. Headquarters 6 Corporate Drive | Halfmoon, NY 12065 One Mustang Drive | Cohoes, NY 12047 tel 518 371 2684 |371 26842688 +1 518 371 2688 tel +1 518 fx 518 371 | fx | www.pva.net ww
Open the catalog to page 1
SB300 High Flow Dispense Valve All dimensions provided in inches
Open the catalog to page 2
