WHERE PRECISION DRIVES PRODUCTION Delta Bond Optical Bonding Series SPECIFICATIONS Power 120/220 V, +/- 10%, 50-60 Hz Air 80 psi, dry non-lubricated Footprint Small: 973mm x 1270mm x 2351mm 38.3” x 50.0” x 92.5” Large: 1332mm x 1588mm x 2133mm 52.4” x 62.5” x 83.9” Display Size (Diagonal 16:9) Small: Up to 12” (~304mm) Large: Up to 17” (~432mm) Delta Bond series equipment is suitable for all steps in the optical bonding process. This includes precision dispense, fill, image corrected pick and place, and bonding of optical devices. It is an ideal solution for use with optically clear adhesives, including acrylics, silicone, epoxy, etc. The entire system offers portions on the process including fill dispensing, cover placement, Fluid-Flow Vision™, and full area cure in place. Sample products include: touch screen to LCD, cover glass to LCD, and more. All Delta Bond series equipment use closed loop servo gantries. Fluid dispensing is precisely metered and supply systems utilize automated fluid preparation technology for the highest possible yields. The Delta Bond System has two standard sizes, with custom sizing available. The small system is designed to accommodate displays up to 12” (~304mm) at 16:9 aspect ratio. The large system is capable of handling 17” displays (~432mm) at 16:9 aspect ratio. The Delta Bond Series has many integrated feautures unique to PVA: • • • • Patented Underside Dot Technology Fluid-Flow Vision System™ Cure in Place Technology (UV only) Exclusive PVA Portal Programming Interface For more information, please contact PVA at [email protected] or (518) 371-2684. Six Corporate Drive | Halfmoon, NY 12065 tel 518 371 2684 |

Delta Bond Series Drawing represents PVA’s largest optical bonding system Note: Drawings for reference only, actual systems will vary.