MOLI 2110 HP – the mobile pipeline concrete pump for high-pressure delivery Lots of space for delivery lines and accessories Powerful compressor High-performance flushing water pump with 900 l water tank File under: A 1.00, BP 1.03, A 4.00, BP 4.03 1 Quick and easy support Stationary concrete pumps cannot be used cost-efficiently for short pours. For jobs like these, the MOLI is a simply unbeatable solution, a real “toughie“ with up to 110 m3 delivery output and 220 bar concrete pressure can cope with any job that comes its way. The pump is quickly set up and is ready for operation in next to no time at all. And when the MOLI has finished the job, the site is available for other work. The combination of an extensive range of equipment and accessories, plus maximum mobility allows the MOLI to be used on a variety of jobs thus making full use of its many capacities. Delivery output up to 110 m3/h, concrete pressure up to 220 bar MOLI is optimally equipped to clean long delivery lines: a powerful compressor and high-pressure flushing water pump plus a 900 l water tank. Numerous other variations in equipment make the MOLI a match for any assignments required on site. BP 3530-1 GB

used at several construction sites ■ extremely powerful pump power unit ■ transports everything required for ■ simple operation and easy handling ■ on-board compressor and high- pressure flushing water pump allow easy cleaning of the whole delivery ■ requires space only during placing Wherever space is at a premium and high performance is essential, then MOLI is the obvious choice concrete; afterwards, the construct- ion site is available for other work For trucks from 231 in weight and 4.5 m wheel base Technical Data Delivery output Concrete pressure Delivery cylinder stroke * rod side / piston...