Catalogs >
Putzmeister >
Ergonic ® Systems

Ergonic ® Systems
9Pages

Catalog excerpts

Ergonic® Systems The technical advancement for more efficiency and a maximum utilisation File under: A 1.00, BP 1.03, A 4.00, BP 4.03 1 BP 3763-1 GB

Open the catalog to page 1

the best conditions for getting ahead Greater efficiency, lower costs, increased flexibility - these are the results that Putzmeister concrete pumps with Ergonic® systems can achieve in pract- Being ready for use more guickly, achiev- ing increased concrete placement perfor- mance and working economically with little wear are important economic fac- tors, and not only for machine and pump operators. Construction site managers have also been convinced by the potenti- al of Ergonic®: the construction site is run more efficiently and Putzmeister pumps with Ergonic® are simply ready for...

Open the catalog to page 2

EBC - Ergonic® Boom Control - for increased concrete placement performance The innovative EBC control system for truck-mounted concrete pumps (Ergonic® Boom Control) was the first of the Ergonic® systems and revolutionised boom control. Aided by a computer, the placing boom can be easily and precisely controlled. Moreover, the concrete place- ment performance of the concrete pump The concrete pump operator is unburden- hose. The boom is precisely moved horiz- ontally and vertically by simple move- ments of the joystick with One Touch A real advantage: no need to change your grip, no...

Open the catalog to page 3

EBC - the boom does exactly Increase in operational safety Raise and slew the arm assembly I Folding in and out: manually with the right-hand joy- I The boom can be automatically stick (M 36) (left-hand joystick for large folded in and out by moving the left- booms with overhead roll-and-fold) ^ hand joystick up or down. ting preferred positions make concreting operations easier locked. Once the position has been saved, the arms remain in their position, regardless of how the other arms are last arm. This position is maintained during concreting. safety provided by working range Additional...

Open the catalog to page 4

Ergonic® remote control: Within your grip Optimum and flexible operation of the machine with Putzmeister radio remote control • Ergonomic boom control with two can be directly operated using the radio remote control. When EBC operation is activated, it is possible to control the boom with The pump operator receives up-to- date feedback and system displays for the machine directly on the clear dis- play via an additional signal trans- The strength of the radio signal and the battery charge state are shown by Better design for more Radio remote control with display: For wireless boom control...

Open the catalog to page 5

EPS - Ergonic® Pump System - ensuring perfect operation The computer-aided Ergonic® control constantly monitors and regulates the operation of the concrete pump and the truck engine. This means maximum pro- ductivity and performance with minimum intervention from the operator. EPS (Ergonic® Pump System) has considerable advantages over convention- al hydraulic controls: it regulates the concrete pump fully electronically and ensures that the pumping process runs The switchover of the transfer tubes, for example, is adjusted to suit the consist- ency of concrete (PUMI®). This means that the...

Open the catalog to page 6

EGD - Ergonic® Graphic Display - EGD (Ergonic® Graphic Display) provides a full overview Main menu The main menu is shown when the It provides information about: ■ Hydraulic fluid temperature pressure limit ■ Delivery rate/delivery rate limit Limit values can be entered in the "Pump settings" menu (see right). The display is easy to operate using three keys and a rotary selection knob: ■ The keys take you from the main menu to the individual submenus (see right-hand side). ■ By turning the rotary selection knob, you can mark the individual symbols in the "Machine status' menu and then press...

Open the catalog to page 7

EOC - Ergonic® Output Control reduces consumption, wear and noise EOC - lower fuel consumption, less wear You can set the delivery rate of your pump directly with just one rotary knob Output Control) automatically regulate to the optimum engine speed with the lowest consumption, wear and noise. EPS (Ergonic® Pump System). EOC - from zero to a hundred You can set the desired delivery rate with the "Output regulation" rotary knob on the remote control. You can control the hydraulic pump performan- ce linearly from zero to the maximum delivery rate. The electronics regulate the speed up to 75...

Open the catalog to page 8

Prepared for the future with the Ergonic® service and training systems ECT - Ergonic® Control Tools are software tools for the parameterisation and checking of Ergonic® components during setting up and service performed Ergonic® Job Site Trammg is a 3-D simulation on the PC, where situations on a construction site with a M 36 can be run through with realistic graphics. The Putzmeister Academy uses this modern ETC - Ergonic® Training Clips are actual video films demonstrating the complete process of operation of a truck- mounted concrete pump (M 36). These are used by trainers at the...

Open the catalog to page 9