*mydirectindustry

Catalogs
Putzmeister
Concrete spraying equipment SPM 500 Wetkret

Concrete spraying equipment SPM 500 Wetkret

Product catalog summary

Overview: This document provides technical specifications for the Putzmeister telescopic spraying arm SA 17.2 and associated equipment, including the Putzmeister concrete pump PM 1810 and the SPM 500 Wetkret system.

Specifications:

Spraying Arm SA 17.2: Maximum vertical reach of 17 m and horizontal reach of 15 m. It features two telescopic arm extensions with a stroke of 2,000 mm each, and a 360-degree rotating spraying head.
Concrete Pump PM 1810: Double-piston, hydraulic drive with a maximum theoretical flow of 30 m³/h and a maximum pressure of 75 bar. It supports a maximum aggregate size of 16 mm.
SPM 500 Wetkret: Includes a hopper with a 350-liter capacity, an electric drive system with 55 kW power, and a diesel engine for dual drive. The additive pump has an adjustment range of 30 - 700 l/h.

Procedures and Operations:

The equipment features a PLC control system and a hydraulic cable reel for efficient operation. It includes a high-pressure water pump for cleaning with a motor output of 6 kW and a maximum pressure of 200 bar.
The off-road vehicle is equipped with a diesel engine, hydrostatic transmission, and four-wheel hydraulic steering, allowing for a maximum speed of 20 km/h.

Optional Equipment:

Options include electric and diesel compressors, a complete spare wheel, proportional radio remote control, and special voltage configurations.

Safety and Compliance:

The driver cabin is FOPS/ROPS certified, ensuring safety standards are met. The vehicle complies with EU-Stage III A / EPA-Tier 3 emissions standards.

Diagrams and Dimensions:

Diagrams illustrate the spraying arm reach and transport dimensions, highlighting a turning radius with crab mode and maximum gradients while driving.

Note: The document states that specifications are subject to change without notice and that the values provided are theoretical maximums.

Catalog excerpts

Concrete spraying equipment SPM 500 Wetkret-1

Concrete spraying equipmentMaximum spraying reach 17 m Max. flow (theor.) 30 m3/h 7.800 mm Note: This is a merely informative, non-binding document. Maximum theoretical values listed. Specifications are subject to change without prior notice. Photos and drawings are for illustrative purposes only. For available options, please consult the factory. Spraying head

Open the catalog to page 1

Concrete spraying equipment SPM 500 Wetkret-2

Putzmeister off-road vehicle, 4-wheel drive Diesel engine, 4 cylinders Engine power Electrical equipment. 2 batteries Diesel tank Putzmeister remote control Drive cable / radio (optional) Cable length Engine emissions In line with EU-Stage III A / EPA-Tier 3 Hydrostatic transmission Gearbox 2-speed in both directions Four-wheel hydraulic steering (4WS), crab mode Traction 4 WD Service brakes: 4-wheel hydraulic multi-disc brakes in oil bath Parking brake: 2-wheel independent, hydraulic multi-disc brakes in oil bath, manual. Emergency brake 4 halogen spotlights 24V 70W H3 Driver cabin. FOPS/ROPS...

Open the catalog to page 2

Concrete spraying equipment SPM 500 Wetkret-3

Vertical spraying reach Horizontal spraying reach Dimensions and turning radius Transport dimensions 10º Maximum longitudinal gradient while driving Maximum transverse gradient while driving Turning radius 4-wheel steering with crab mode Putzmeister Ibérica S.A. | Camino de hormigueras 173, 28031 MADRID, SPAIN | Tel. +34 91 428 81 00 | [email protected] Copyright 2017 | © by Putzmeister | Printed in Spai

Open the catalog to page 3

Concrete spraying equipment SPM 500 Wetkret

Concrete spraying equipment SPM 500 Wetkret

Catalog excerpts

All Putzmeister catalogs and technical brochures

Archived catalogs