0160 Series

Product catalog summary

Specifications:
The document outlines the specifications for hydraulic and lube oil filtration media, specifically the Microfil® III, Hi-Collapse Microfil® III, and Micropleat® media. The filtration media are available in various micron sizes, with Microfil® III and Hi-Collapse Microfil® III offering absolute filtration at 1, 3, 6, 12, 20, and 25 microns, and Micropleat® media providing nominal filtration at 5, 10, 20, and 40 microns. The Beta Ratio for these media is ≥200, as per ISO 4572 or 16889 and NFPA T.3.10.8.8 standards.

Seal Temperature Range:
The document specifies the temperature ranges for different seal materials: Nitrile (-65°F to 225°F), Ethylene Propylene (-70°F to 250°F), and Fluorocarbon (-15°F to 400°F).

Collapse Pressures and Flow Rate:
The minimum element collapse pressures are 300 PSID and 3000 PSID, with a rated flow of 60 GPM (227 l/min).

Ordering Codes:
The document provides a detailed ordering code system for selecting the appropriate filter elements based on collapse pressure, length, seal material, micron size, and media type.

Media Composition:
Microfil® III and Hi-Collapse Microfil® III media are composed of fiberglass, organic, and inorganic materials, while Micropleat® media is made from resin-impregnated cellulose.

Dimensions:
The filter elements have an outer diameter of 2.7 inches, a length of 4.56 inches, and an inner diameter of 1.33 inches.

Clean Pressure Drop Curve:
A graph is provided to illustrate the clean pressure drop across the filter elements at various flow rates, using MIL-H-5606 fluid at 100°F.

Catalog excerpts

Purolator Facet, Inc. • Made in USA 8439 Triad Drive • Greensboro, NC 27409 Tel: 800-852-4449 or 336-668-4444 • Fax: 336-668-4452 Email: [email protected] • Web site: www.purolator-facet.com FILTER ELEMENTS Filtration Media: * Microfil® III and Hi-Collapse Microfil® III Media 1, 3, 6, 12, 20, 25 micron absolute (Beta Ratio: ≥200 (multipass test ISO 4572 or 16889 and NFPA T.3.10.8.8)) * * Micropleat® Media 5, 10, 20, and 40 micron nominal Seal Temperature Range: Nitrile Seal: -65°F to 225°F (-55°C to 107°C) Ethylene Propylene: -70°F to 250°F (-57°C to 121°C) Fluorocarbon: -15°F to 400°F (-26°C to 205°C) Minimum Element Collapse Pressures: Rated Flow: NOTE: Crosses with Hydac (Hycon) elements. NOTE: Micropleat® media available in micron sizes: 5, 10, 20, and 40 micron nominal. Not available for 3000 PSID collapse elements. N - Nitrile F - Fluorocarbon E - Ethylene Propylene 1 - Micropleat® Media 2 - Microfil® III Media 4 - Hi-Collapse Microfil® III Media Microfil®III media available in micron sizes: 1, 3, 6, 12, 20 and 25 micron absolute. Hi-Collapse Microfil®III media available only in 3000 PSID collapse. Available in micron sizes: 1, 3, 6, 12, 20 and 25 micron absolute. *Microfil® III and Hi-Collapse Microfil® III composite media, composed of fiberglass, organic and inorganic materials. **Micropleat® resin-impregnated cellulose media.

Open the catalog to page 1

CLEAN PRESSURE DROP CURVE Legend - 1 micron absolute - 3 micron absolute - 6 micron absolute - 5 micron nominal - 10 micron nominal - 12 µm abs., 20 µm nom. - 20 µm abs., 25 µm nom. - 40 micron nominal

Open the catalog to page 2

All Purolator catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list