PURION® THE BEST SOLUTION

PURION® THE BEST SOLUTION UV: DISINFECTION WITHOUT CHEMICALS UVC based disinfection operating principle 3 configuration options for monitoring of the PURION UV plants 4-8 equipment spare parts 41 - 50 company with tradition and innovation 51 - 54

visible light OPERATING PRINCIPLE Wavelength at around 264 nm effectively inactivate microorganism. Microorganisms such as bacteria, moulds, yeasts and protozoa can be destroyed or removed by physical, biological and chemical methods. UVC works using a photolytic effect whereby the radiation destroys or inactivates the microorganism so that it can no longer multiply. The phenomenon whereby microorganisms can be disfigured or destroyed is independent of host state (fluid or solid) and indeed pH or temperature. Therefore disinfection of fluides, air and surfaces without using chemicals or high...

CONFIGURATION OPTIONES FOR MONITORING OF THE PURION UV-PLANTS PURION guarantees disinfection for an operating time up to max. 10.000 h or max. 8.000 h for PURION UV-lamps with Amalgam technology for high ambient temperaturees up to 90 C°. After 10.000 h or 8.000 h of operation the UVC-intensity falls below 60% of the initial value. All technical performance data of the PURION UV plants have been derived from this “end of life” value. Therefore the PURION UV-lamp has to be replaced after 10.000 h / 8.000 h. The UVC-light that is decisive for disinfection has a wavelength of approx. 260 nm and...

PURION Monitoring of the UV-lamps operational time Operating Time Counter -OTC The Operating Time Counter (OTC) option monitors the life time of the UV lamp via summation of the operating time. The current status is displayed via LED's. The OTC option works as a time counter and is integrated in the control box. The monitoring system is designed as a traffic light. Two thresholds for the operating time have been saved: - As long as the operating time is below 95% of the guaranteed life time the green LED is illuminated. - If the operating time exceeds 95% of the guaranteed life time the...

Operating Power Detection OPD The Operating Power Detection (OPD) option monitors the life time of the UV lamp via detecting the UV intensity. The current status is displayed via LED's. product line Operating Power Detection - OPD automatic recording of the exact 230 V AC or 12 V DC or UVC intensity that is currently ge pply 24 V DC signal input automatic (pre-)alarm when lamp replacement is necessary signal output safe reset procedure maintenance free operation optional: potential free contact for any LED load potential free contacts special function calibration after replacement of the...

This sensor is suitable for monitoring of the intensity of PURION UVC low-pressure lamps, PURION UVC high-output lamps und PURION UVC amalgam lamps. silicon carbide chip warrants extreme radiation power The sensor is equipped with a silicon carbide photodiode (SiC). The photodiode has a very good sensitivity within the range of 250 and 260 nm. Therfore the diode is suitable to monitor UV light that is used for disinfection and with a peak emission rate at 254 nm. This is in line with the DNS absorbtion curve. The monitoring unit is designed as a traffic light. During monitoring the percentage...

linear sensitivity to light (A/W) This sensor is suitable for monitoring of the intensity of PURION UVC low-pressure lamps, PURION UVC high-output lamps und PURION UVC amalgam lamps. angle spread approx. 30° 0°C up to 60°C stainless steel 1.4571 connection flanges supplied voltage TO-18 metallic housing - 0.054 mm² active chip surface power output silicon carbide chip warrants extreme radiation power optimal ability for measuring powerful UVC radiation wideband UVA-UVB-UVC Photodiode product line in a stainless steel housing with integrated booster and power output The sensor type is SiC-based...

AIRSOLUTIONS FOR TREATMENT OF AIR AIRPURION-plants direct and indirect irradiation 10 - 15 AIRPURION active plants closed systems with integrated air circulation 16 - 18 AIRPURION DUO UVC-disinfection and illumination 19 AIRPURION Sterile Fridge active closed systems for UVC disinfection and removal of bad odour 20 AIRPURION-AIR processing units closed systems with PURION reactors 21 - 26 PURION UV-Sets 27 - 38 AIRPURION mobile mobile UVC-disinfection 39 - 40

With AIRPURION UV-plants for dry rooms the PURION UV-lamp works directly within the room or the flow of air. Therefore maximum radiant efficiency is ensured. AIRPURION UV-plants for dry rooms are the best solution for e.g. for laboratories and clean rooms. Depending on the constructional conditions and the kind of microorganisms to be inactivate a customized solution should be determined. With AIRPURION UV-plants for humid rooms the PURION UV-lamp is capsuled into an immersion tube system that is protection the electronic components against humidity. Additionally the electronic ballast is integrated...

All AIRPURION units and PURION UV Sets for disinfection of tanks and surfaces can be equipped with splinter protection. The Safety Basket for the PURION product families PURION UVSet 36 W and PURION UV-Set 90 W enables the assembling in horizontal position and without additional thrust bearing in case of vertical installation. The quartz glass is coated with a special UVC-transparent film. Therfore it is guaranteed that no glass splinters can be released when the quartz tube has been damaged. The PURION Splinter Protection is available for the following PURION product lines: The option for stabilization...

The UV-plant AIRPURION 17 with an irradiation width of 300 mm consists of a matt anodized aluminium profile with matching cover sheets. The radiator's compartment is designed for housing a pristine-polished aluminium reflector. On its rear side the cabling as well as the electronic cut-in unit is integrated into the housing. PURION UV-lamp 17 W article number: 200 00300 0000 service-kit article number: 292 00900 0000