PURION® THE BEST SOLUTION SOLUTIONS FOR TREATMENT OF SURFACES

PURION® THE BEST SOLUTION UV: DISINFECTION WITHOUT CHEMICALS UVC based disinfection operating principle 3 configuration options for monitoring of the PURION UV plants 4-8 equipment spare parts 19 - 28 company with tradition and innovation 29 - 32

visible light OPERATING PRINCIPLE Wavelength at around 264 nm effectively inactivate microorganism. Microorganisms such as bacteria, moulds, yeasts and protozoa can be destroyed or removed by physical, biological and chemical methods. UVC works using a photolytic effect whereby the radiation destroys or inactivates the microorganism so that it can no longer multiply. The phenomenon whereby microorganisms can be disfigured or destroyed is independent of host state (fluid or solid) and indeed pH or temperature. Therefore disinfection of fluides, air and surfaces without using chemicals or high...

CONFIGURATION OPTIONES FOR MONITORING OF THE PURION UV-PLANTS PURION guarantees disinfection for an operating time up to max. 10.000 h or max. 8.000 h for PURION UV-lamps with Amalgam technology for high ambient temperaturees up to 90 C°. After 10.000 h or 8.000 h of operation the UVC-intensity falls below 60% of the initial value. All technical performance data of the PURION UV plants have been derived from this “end of life” value. Therefore the PURION UV-lamp has to be replaced after 10.000 h / 8.000 h. The UVC-light that is decisive for disinfection has a wavelength of approx. 260 nm and...

PURION Monitoring of the UV-lamps operational time Operating Time Counter -OTC The Operating Time Counter (OTC) option monitors the life time of the UV lamp via summation of the operating time. The current status is displayed via LED's. The OTC option works as a time counter and is integrated in the control box. The monitoring system is designed as a traffic light. Two thresholds for the operating time have been saved: - As long as the operating time is below 95% of the guaranteed life time the green LED is illuminated. - If the operating time exceeds 95% of the guaranteed life time the...

Operating Power Detection OPD The Operating Power Detection (OPD) option monitors the life time of the UV lamp via detecting the UV intensity. The current status is displayed via LED's. product line Operating Power Detection - OPD automatic recording of the exact 230 V AC or 12 V DC or UVC intensity that is currently ge pply 24 V DC signal input automatic (pre-)alarm when lamp replacement is necessary signal output safe reset procedure maintenance free operation optional: potential free contact for any LED load potential free contacts special function calibration after replacement of the...

This sensor is suitable for monitoring of the intensity of PURION UVC low-pressure lamps, PURION UVC high-output lamps und PURION UVC amalgam lamps. silicon carbide chip warrants extreme radiation power The sensor is equipped with a silicon carbide photodiode (SiC). The photodiode has a very good sensitivity within the range of 250 and 260 nm. Therfore the diode is suitable to monitor UV light that is used for disinfection and with a peak emission rate at 254 nm. This is in line with the DNS absorbtion curve. The monitoring unit is designed as a traffic light. During monitoring the percentage...

linear sensitivity to light (A/W) This sensor is suitable for monitoring of the intensity of PURION UVC low-pressure lamps, PURION UVC high-output lamps und PURION UVC amalgam lamps. angle spread approx. 30° 0°C up to 60°C stainless steel 1.4571 connection flanges supplied voltage TO-18 metallic housing - 0.054 mm² active chip surface power output silicon carbide chip warrants extreme radiation power optimal ability for measuring powerful UVC radiation wideband UVA-UVB-UVC Photodiode product line in a stainless steel housing with integrated booster and power output The sensor type is SiC-based...

PURION UV-modules direct irradiation for disinfection of conveyor bands 10 - 13 AIRPURION-plants Compact systems for direct irradiation 14 - 18

The PURION UV MODULE 300 consists of an Aluminium housing that is unclosed in disinfection direction. It is possible to install the PURION UV MODULE 300 above or below the area to be disinfected. Therefore it is perfectly suitable for disinfection of conveyor bands etc. The UV-highly polished Aluminium surface (PVD coated) with increased reflection ensures an optimal usage of the UV radiation. product line disinfection performance: distance of 50 mm distance of 500 mm band width dimension (L x B x H in mm) disinfection of conveyor bands disinfection of surfaces disinfection of packaging material installation...

The PURION UV MODULE 700 consists of an Aluminium housing that is unclosed in disinfection direction. It is possible to install the PURION UV MODULE 700 above or below the area to be disinfected. Therefore it is perfectly suitable for disinfection of conveyor bands etc. The UV-highly polished Aluminium surface (PVD coated) with increased reflection ensures an optimal usage of the UV radiation. product line disinfection performance: distance of 50 mm distance of 500 mm band width dimension (L x B x H in mm) disinfection of conveyor bands disinfection of surfaces disinfection of packaging material installation...

The PURION UV MODULE 1000 consists of an Aluminium housing that is unclosed in disinfection direction. It is possible to install the PURION UV MODULE 1000 above or below the area to be disinfected. Therefore it is perfectly suitable for disinfection of conveyor bands etc. The UV-highly polished Aluminium surface (PVD coated) with increased reflection ensures an optimal usage of the UV radiation. product line disinfection performance: distance of 50 mm distance of 500 mm band width dimension (L x B x H in mm) disinfection of conveyor bands disinfection of surfaces disinfection of packaging material installation...

The PURION UV MODULE 1400 consists of an Aluminium housing that is unclosed in disinfection direction. It is possible to install the PURION UV MODULE 1400 above or below the area to be disinfected. Therefore it is perfectly suitable for disinfection of conveyor bands etc. The UV-highly polished Aluminium surface (PVD coated) with increased reflection ensures an optimal usage of the UV radiation. product line disinfection performance: distance of 50 mm distance of 500 mm band width dimension (L x B x H in mm) disinfection of conveyor bands disinfection of surfaces disinfection of packaging material installation...