Flat sensor APPLICATION These flat sensors are detectors for all types of metal for the use in conveyor belts and chutes. Using them it is possible to inspect bulk material as well as finished goods. Foils or other roll goods can be led directly over the sensor and thus be detected on metallic contamination. The sensors serve for quality assurance as well as for machine protection. Beyond that the flat detectors are also appropriate for applications of the process control e.g. for object counting or for completeness checks. The flexible system of three different sensors allows variations in width. Starting from 95 mm there is no limit upwards. Moreo- ver the sensors can be mounted above and below the conveyor belt (sandwich combination) in order to increase the sensitivity. In combination with the optionally available control unit conveyor plants and discharging units can be controlled directly. sensors endlessly alignable (>95 mm) no metal-free zones necessary stable and shook-proofed aluminium housing easy mounting separate control electronics with freely adjustable functions protection class IP67 sensitivity adjustable via control electronics Pulsotronic-Anlagentechnik GmbH Neue Schichtstraße 7 D-09366 Niederdorf / Germany phone: +49 37296 9383-500 [email protected] www.pulsotronic-anlagentechnik.de

Type: MESEP® ARFUNCTION & HANDLING The sensor has a dynamic working principle which means it only detects moving metallic pieces in the sensor range. If a non-moving metal piece is situated in the detection range, it does not excite a signal and therefore is not detected. Contrary to sensors with a static workling principle this system allows operation with a much higher sensitivity. Thus even small metallic pieces can be detected dead reliable. The operation of the sensor requires a control unit. This realises the voltage supply for the sensors and allows the adjustment of all parameters. The...

Pulsotronic-Anlagentechnik GmbH Neue SchichtstraGe 7 D-09366 Niederdorf / Germany phone: +49 37296 9383-500

Version: 2201eng | Typing and printing errors reserved. Subject to changes. Pulsotronic-Anlagentechnik GmbH Neue Schichtstraße 7 D-09366 Niederdorf / Germany phone: +49 37296 9383-500 [email protected] www.pulsotronic-anlagentechnik.de