*mydirectindustry

Catalogs
Pulsarlube
Pulsarlube PLC

Pulsarlube PLC

Product catalog summary

Overview
This document provides technical specifications and features of the PLC Controlled Electromechanical Lubricator series (PLC60/PLC120/PLC240/PLC480) designed for greater lubrication efficiency and remote monitoring.

Specifications

Connecting Thread: 3/8" BSPT
Grease Pouch Capacity: 60ml/120ml/240ml/480ml (replaceable)
Operating Temperature: -20℃ to 60℃ (-4°F to 140°F)
Operating Pressure: Average 30kgf/cm² (425psi), Max 60kgf/cm² (850psi)
Power Supply: 9~36V DC (DC/DC Converter included)
Output Voltage: Max 1A (for alarm)

Features & Advantages

PLC Integration: Allows for consistent and precise lubrication on demand, programmed to deliver fresh lubricant upon receiving a signal from the PLC.
Multi-Point Installation: Supports up to 8 lubrication points using Ø6mm tube, with a maximum length of 6m (20ft) per point.
High Output Pressure: User-controlled lubrication with a dispensing rate based on equipment operating time.
Dispensing Periods: Available in MONTH type (1 to 12 months) and INTERVAL type (Modes 1 to 6).

Product Certifications & IP Code

CE / IP68 certified

Dispensing Volume

MONTH type: 0.34ml/stroke (@20℃/68°F)
INTERVAL type: 0.34ml x Mode selected (@20℃/68°F)
Purge Mode: 2ml (6 strokes)

PLC Input/Output Types

Available in PNP or NPN configurations

Additional Components

Pouch Spring, Pouch Plate, Grease Pouch, Housing, LCD, Main Body, Connecting Cable, DC Panel, Power Supply, Alarm (optional), Display Panel (optional)

Contact Information
1480 Howard St, Elk Grove Village, IL 60007, USA
Tel: 1-847-593-5300
Fax: 1-847-593-5303
Website: www.pulsarlube.com
Email: [email protected]

Catalog excerpts

PLC Controlled. Remotely Monitored. Greater Lubrication Efficiency.

Open the catalog to page 1

PLC Controlled High Performance Electromechanical Lubricator Programmed to deliver fresh lubricant upon receiving a signal from the PLC Consistent Lubrication Precise lubrication on demand Multi-Point Installation Up to 8 lube points using Ø6mm tube, max. 6m (20ft) per point High Output Pressure User-Controlled Lubrication The user can program the dispensing rate based on the operating time of the equipment (INTERVAL type) PLC MONTH & INTERVAL TYPE Wire Connection Instructions Applicable for both MONTH TYPE & INTERVAL TYPE Connection to External Power Supply (DC Adapter for MONTH type only) Power...

Open the catalog to page 2

All Pulsarlube catalogs and technical brochures

Archived catalogs

Pulsarlube E
2 Pages