Catalogs >
Pulsarlube >
Operation manual PLC

Operation manual PLC
2Pages

Catalog excerpts

| Connection Methods Connection to PLC equipment (For both models, MONTH type & INTERVAL type) MLIIBE PLCUSER MANUAL Connection to External Power Supply (DC Adapter) (MONTH type only) PRODUCT / PLC MODEL PULSARLUBE PLC AUTOMATIC LUBRICATOR PLC Controlled High Performance Automatic Grease Lubricator (MONTH / INTERVAL type) | Specifications Technical information is subject to change without notice. Thank you for purchasing the Pulsarlube PLC, the electromechanical automatic grease lubricator from Pulsarlube USA, Inc. To ensure the safe operation and proper installation of the Pulsarlube PLC unit, we strongly recommend that you read the following information carefully before use. If you require further information, please contact your local supplier or manufacturer. | Warning | Shelf Life and Product Warranty The shelf life of the Pulsarlube PLC Is 1 year from the date of production. Product warranty is limited to original defects in material and workmanship and will not cover any collateral damage due to mishandling, abuse and/or any other inappropriate use of this product. Warranty period is 1 year from the date of purchase. | How to Order PLC120 - PL1 PLC240 - PL1 Grease Type Pulsarlube Model # (PLC120:120ml, PLC240: 240ml) Pulsarlube USA, Inc. 1480 Howard Street, Elk Grove Village, IL 60007, USA TEL: 1-847-593-5300 FAX: 1-847-593-5303 www.pulsarlube.com / info@pulsarlube.com Rev.01

Open the catalog to page 1

Service Pack Installation Button & LCD Functions Power Button press instructions Short press If the Pulsarlube PLC unit is provided with a replaceable Service Pack, the following procedure is required before step #2 of the above instructions. For complete Service Pack installation instructions, please refer to the Service Pack user manual, step #2~6 in the section of "How to Replace a Service Pack". 2 ( To be able to perform the functions below, please make sure that the lubricator’s auto lock function is deactivated by pressing the MODE button for 3 seconds. ) Programming Instructions...

Open the catalog to page 2