Catalogs >
Pulsarlube >
Operation manual MSP

Operation manual MSP
1 / 2Pages

Catalog excerpts

KSL/aRLUBE MSP* USER MANUAL Doc No. 1092-000 REV. 140203 Operating Principles The MSP unit turns “On” or “Off” in synchronization with the equipment on which it is installed. It will dispense a preset amount of grease as long as the machine is operating. If the equipment is not on, the Pulsarlube MSP unit goes into “stand-by mode” and does not dispense lubricant until the machine goes back into operation. The MSP unit is an externally powered unit. The power supply connected to the machine or PLC powers the unit. Therefore, there is no need to replace the battery; only the grease pack will need to be replaced. MSP Lubricator The Pulsarlube MSP functioning processl_

Open the catalog to page 1

Pulsarlube MSP (Machine Synchronized External Power Unit) How the MSP unit time control programming works - Example (1 Month Mode) 1. If MSP unit was set 1 Month Mode, then start “1” month blinking and 30 days displayed on LCD. 2. If MSP unit was working with main machine for lOdays, then ‘‘1” month blinking and 20 days displayed on LCD 3. Main machine was power OFF for 10 days, and then MSP unit has been sleep mode for 10 days. No LCD display. 4. However, CPU will keep internal data using back up battery power. Now, Main machine power ON, MSP unit will be on and continue working for the...

Open the catalog to page 2