Catalogs >
Pulsar Measurement >
Sludge Finder 2 Sales Brochure

Sludge Finder 2 Sales Brochure
4Pages

Catalog excerpts

SLUDGE FINDER 2 Reliable & continuous sludge blanket level measurement. Two-Part System Purposely Designed for Sludge Blanket Level Measurement The Sludge Finder 2 is a versatile, accurate, and reliable solution to the problem of accurately measuring interface levels in primary or secondary settlement tanks and Sequencing Batch Reactors (SBR) systems. Operating ultrasonically through a liquid, Sludge Finder 2 uses proven echo processing algorithms to identify the sludge interface level using state of the art digital echo processing technique found only in this unit. The unique viper transducer is immersed in the liquid, emitting a high-frequency ultrasonic pulse down towards the sludge interface. The pulse reflects from the interface of the denser material back to the Viper transducer face. This echo is analyzed by the controller unit providing a depth reading and an analog output proportional to the height of the interface above the vessel bottom. Multiple Tanks & Multiple Applications Sludge Finder 2 will operate with one or two transducers, you can mix and match Sludge Transducers and Pulsar Measurement’s main dB Transducer range to give astonishing versatility. Manage two clarifier’s / thickeners, or one clarifier plus an ultrasonic level application from a sludge unit, THE RIGHT METER FOR • Primary & Secondary Settlement Tanks • DAF Thickeners • Gravity Thickeners • Stationary & Traveling Bridges providing flexible, economical control and a sludge connection point for system interface. Sludge Finder 2 features a microprocessor and a multifunction display showing blanket level, complete echo profile, alarm points, tank depth, and multiple tank status.

Open the catalog to page 1

Output Options Sludge Finder 2 features 4-20mA isolated outputs for each channel, with an optional RS485 connection (Modbus RTU or Profibus). Six control relays are included (5A rated), assignable to any channel. An optional Radio Telemetry System may be fitted with a 500 m (1,640 ft) line of sight range. Up to 48 Nodes can be used using a ‘Multihop’ receiver installation. Remote measurement with Sludge Finder 2 means you can put an end to tedious, time-consuming, potentially unhygienic, and hazardous manual measurements using gap switches or vacuum probes. Self-Cleaning Transducer Sludge...

Open the catalog to page 2

Technical Specifications PHYSICAL Controller Body Dimensions: 235 mm x 184 mm x 120 mm (9.3 in x 7.2 in x 4.7 in) Wall mount only. Enclosure Material/ Description: Polycarbonate, flame resistant to UL94-5V Transducer Cable Extensions: 2 twisted pair 0.5 mm2 with overall screen Cable Entry Detail: Maximum Separation: Max. & Min. Temperature (Electronics): Flammable Atmosphere Approval: 10 cable entry knock outs, 5 x M20 and 1 x M16 underside. 4 x PG11 at rear IP65/NEMA 4X -20 °C to +50 °C (-4 °F to +122 °F) Safe area compatible with approved sensors/transducers. See sensor/transducer spec...

Open the catalog to page 3

Sludge Finder 2 Drawing Back Sludge Finder 2 Cable Entry Drawing Delivering the Measure of Possibility Pulsar Measurement offers worldwide professional support for all of our products, and our network of global partners all offer full support and training. Our facilities in Malvern, UK and Largo, USA are home to technical support teams who are always available to answer your call or attend your site when required. Our global presence, with direct offices in the UK, USA, Canada, and Malaysia, allows us to create close relationships with our customers and provide service, support, training,...

Open the catalog to page 4

Sludge Finder 2 Sales Brochure 4Pages

Catalog excerpts

All Pulsar Measurement catalogs and technical brochures

Sludge Finder 2 Sales Brochure
4Pages