Catalogs >
Pulsar Measurement >
SFM 6.1 Slurry Flow Meter

SFM 6.1 Slurry Flow Meter
1 / 4Pages

Catalog excerpts

Non-contacting, slurry, flow meter monitors, displays, totalizes, and controls from outside a pipe Easy to Use, Accurate, Slurry, Flow Meter Measures with Clamp-on, Ultrasonic Sensor Specifically Designed for Limestone Slurry, Fly Ash Slurry, Gypsum Slurry, & Many Others The Greyline SFM 6.1 was specifically developed for the slurry applications found in today’s industrial facilities. The SFM 6.1 incorporates more than 25 years of Pulsar Measurement ultrasonic flow measurement experience. The SFM 6.1 works best in applications that would prove problematic for regular contacting flow meters. Since the sensor is mounted on the outside of a pipe, rather than directly contacting the material, it is unaffected by the wear and tear of abrasive slurries. A non-contacting sensor means there is no interruption to flow and no pressure drop. No Contact, No Maintenance, External Sensor Installation of the Greyline SFM 6.1 is fast and easy. The sensor mounts directly to the outside of a pipe meaning there is no need to shut down flow or cut into the pipe. The SFM 6.1 sends an ultrasonic signal into the pipe and measures acoustic reflections off solids and gas bubbles suspended in the slurry. I N F O @ P U L S A R M E A S U R E M E N T . C O M THE RIGHT METER FOR • Fly Ash Slurry • Limestone Slurry • Gypsum Slurry • Viscous Liquids • Sludge • Lubricating Oils • Raw Sewage • Crude Oil • Chemicals & • Cooling Water Acids • Solvents Easy to Install Each SFM 6.1 includes a clamp-on ultrasonic sensor, an adjustable stainless steel mounting clamp, and sensor coupling compound. The sensor fits on the outside of any pipe diameter 12.7 mm (0.5 in) or larger.

Open the catalog to page 1

Simple, Single-Head Sensor Design Ultrasonic signals are transmitted and received from a single-head sensor, the accompanying mounting clamp ensures that the sensor is correctly aligned on both horizontal and vertical pipes. The SFM 6.1 automatically self-tunes to the cable length - up to 152.4 m (500 ft). Works on Most Pipes The Greyline SFM 6.1 measures flow in PVC, carbon steel, stainless steel, cast iron, HDPE, ductile iron, and lined ductile iron... any pipe material that conducts ultrasound. Doppler signals cannot transmit through pipe walls that contain air pockets (e.g. concrete or...

Open the catalog to page 2

Technical Specifications GENERAL SPECIFICATIONS Flow Rate Range: ±2% of reading or 30.5 mm/s (1.2 in/s) whichever is greater. Requires solids or bubbles minimum size of 100 microns, minimum concentration 75 ppm. Repeatability: ±0.1%, Linearity ±0.5% 100-240 V AC 50/60 Hz (see Options), 2.4 to 5.6 W depending on options Power Input: 100-240 V AC 50/60Hz 10 VA maximum. Optional: 9-32 V DC, 10 Watts maximum Control Relays: Qty 2, rated 5 A SPDT, programmable flow alarm and/or proportional pulse NEMA4 stainless steel with window Pipe Size: Built-in 5-button keypad with English, French, or...

Open the catalog to page 3

Greyline SFM 6.1 Slurry Flow Meter The SFM 6.1 flow sensor is mounted to the outside of a pipe with no need to interrupt the flow or cut the pipe. Calibration is easy with the built-in, 5-button keypad, featuring password protection to prevent tampering. Select your choice of flow units and enter the pipe diameter through the user-friendly calibration menu. Special Features • Digital processing system tracks flow signals accurately and auto-zeroes with signal loss • Noise suppression circuitry filters “dirty” power and electrical interference • Automatically converts between measurement...

Open the catalog to page 4

SFM 6.1 Slurry Flow Meter 1 / 4Pages

Catalog excerpts

All Pulsar Measurement catalogs and technical brochures

SFM 6.1 Slurry Flow Meter
1 / 4Pages