IMP+ Self-contained, ultrasonic level measurement without compromise. The IMP series is a range of compact, low-profile, self-contained units with the benefit of digital echo processing. There is an IMP unit to suit your application. 3 m (9.8 ft), 6 m (19.7 ft), and 10 m (32.8 ft) range versions are available and each can be wired for 2 wire or 3 wire operation. The IMP+ features an LCD display and digital temperature measurement and compensation with 2 relay outputs as standard. The IMP+ can be used wherever you need a reliable, non-contacting level measurement, and digital echo processing means IMP+ is perfect for solids or liquidsit can be installed in sumps, tanks, silos, or anywhere you need a display telling you the level, or analog output to interface with your site control system or drive a display. Battery Power When used on battery power for intermittent (wake-up) applications, the IMP+ features a high-speed boot up of around circa 3 seconds which maximizes battery life. For example, if an IMP were switched on every 15 minutes for a 3-second reading, the average current is a mere 40μA. System Integration Active and passive (sourcing and sinking) analog outputs assist with system integration, especially when retrofitting into older installations. THE RIGHT METER FOR • Tank Level Applications • Chemical Dosing • Simple Level Indication • Open & Closed Vessel Level Requirements • Solids Level Indication Simple to Install The compact IMP+ is only 175 mm (6 in) high with a 130 mm (5.1 in) diameter. Cable glands are provided and IMP+ can be simply screwed into a 1.5” or 2” universal fitting (a 1.5” or 2” adapter is available). High transducer power and tight beam angles, together with Pulsar Measurement’s digital echo processing, makes IMP+ ideal for many “difficult” applications such as dusty or foamy environments, or where a tank has unavoidable intrusions.

The integral display makes programming IMP+ extremely straightforward. IMP+ can be completely set up, without compromising the IP rating, using the integral keypad alone with no need for a PC. Optional IMP PC software makes it easy to fine-tune IMP’s performance and “clone” any number of IMP units to the same settings if, for example, they are being used on a tank farm. IMP PC is optional software that extends the capabilities of the IMP+ and allows a user to: • Download, analyze, and store echo profiles. A great way to see exactly what is happening in the application. Fine-tuning for ultimate...

Technical Specifications PHYSICAL Controller Body Dimensions: Cable Entry Detail: 2 off cable glands 4.5 mm to 10 mm (Torque to 2NM) Temp. Range (Ambient): Temp. Range (Process): Beam Angle (-3dB Half Power): Measurement Range: Operating Frequency: Beam Angle (-3dB Half Power): Measurement Range: Operating Frequency: Beam Angle (-3dB Half Power): Measurement Range: Operating Frequency: Listed in the Certificate of Conformity within the manual Input Voltage: Temperature Compensation: Via internal temperature sensor (±0.5 °C (32.9 °F) accuracy). Level and volume conversion are installed allowing...

2 WIRE CONFIGURATION FEATURES • RS232 (RJ11 port) connection for diagnostics and software updates 3 WIRE CONFIGURATION FEATURES • All 2-wire version features plus: • 4 button keypad for parameter entry • 2 relays: single pole two way, 1A 30 V DC/AC • Power consumption with relays energised <60 mA (less 12 mA/relay not energized) • Active and passive 4-20mA outputs Delivering the Measure of Possibility Pulsar Measurement offers worldwide professional support for all of our products, and our network of global partners all offer full support and training. Our facilities in Malvern, UK and Largo,...