IMP Lite Sales Brochure
1 / 4Pages

IMP LITE Lower cost, loop-powered alternative to IMP+ with 2-wire configuration and an RJ11 port. The IMP series is a range of compact, low-profile, self-contained units with the benefit of digital echo processing. There is an IMP unit to suit your application. 3 m (9.8 ft), 6 m (19.7 ft), and 10 m (32.8 ft) range versions are available and each can be wired for 2 wire or 3 wire operation. The IMP Lite features an LCD display and digital temperature measurement and compensation with 2 relay outputs as standard. The IMP Lite can be used wherever you need a reliable, non-contacting level measurement, and digital echo processing means IMP Lite is perfect for solids or liquids. It can be installed in sumps, tanks, silos, or anywhere you need a display telling you the level, or analog output to interface with your site control system or drive a display. Battery Power When used on battery power for intermittent (wake-up) applications, the IMP Lite features a high-speed boot up of around circa 3 seconds which maximizes battery life. For example, if an IMP were switched on every 15 minutes for a 3-second reading, the average current is a mere 40μA. System Integration Active and passive (sourcing and sinking) analog outputs assist with system integration, especially when retrofitting into older installations. THE RIGHT METER FOR • Tank Level Applications • Chemical Dosing • Simple Level Indication • Open & Closed Vessel Level Requirements • Solids Level Indication Simple to Install The compact IMP Lite is only 175 mm (6 in) high with a 130 mm (5 in) diameter. Cable glands are provided and IMP Lite can be simply screwed into a 1.5” or 2” universal fitting (a 1.5” or 2” adapter is available). High transducer power and tight beam angles, together with Pulsar Measurement’s digital echo processing, makes IMP Lite ideal for many “difficult” applications such as dusty or foamy environments, or where a tank has unavoidable intrusions.

The integral display makes programming IMP Lite extremely straightforward. IMP Lite can be completely set up, without compromising the IP rating, using the integral keypad alone with no need for a PC. Optional IMP PC software makes it easy to fine-tune IMP’s performance and “clone” any number of IMP units to the same settings if, for example, they are being used on a tank farm. IMP PC is optional software that extends the capabilities of the IMP+ and allows a user to: • Download, analyze, and store echo profiles. A great way to see exactly what is happening in the application. Fine-tuning...

Technical Specifications PHYSICAL Controller Body Dimensions: Cable Entry Detail: 2 off 16 mm (0.63 in) cable glands 3.5 mm to 10 mm (0.14 in to 0.4 in) cable diameter 1.5 in (3 m (9.8 ft) and 6 m (2 ft) range versions), 2 in (10 m (32.8 ft) version) universal thread — suits BSP and NPT, parallel and tapered Temp. Range (Ambient): Temp. Range (Process): Beam Angle (-3dB Half Power): Measurement Range: Operating Frequency: Beam Angle (-3dB Half Power): Measurement Range: Operating Frequency: Beam Angle (-3dB Half Power): Measurement Range: Operating Frequency: Input Voltage: Temperature...

Delivering the Measure of Possibility Pulsar Measurement offers worldwide professional support for all of our products, and our network of global partners all offer full support and training. Our facilities in Malvern, UK and Largo, USA are home to technical support teams who are always available to answer your call or attend your site when required. Our global presence, with direct offices in the UK, USA, Canada, and Malaysia, allows us to create close relationships with our customers and provide service, support, training, and information throughout the lifetime of your product. For more...