dBi MODBUS INTELLIGENT TRANSDUCERS Combining the highest intelligence with minimal complexity in a non-contact level transmitter. Setting new standards in communications, offering low-power ultrasonic level measurement with capabilities superior to traditional transducers. The dBi Modbus (dBi-M) series of transducers are the ultimate, low-power, ultrasonic level sensors that benefit from Modbus communication. The series features Pulsar Measurement’s world-leading DATEM echo processing for accurate and reliable measurement in the most challenging applications, with a measurement range of 125 mm to 15 m (4.9 in to 49.2 ft) across multiple sensors. The dBi-M allows users to transmit measurement and calibration data digitally between the sensor and a PLC, SCADA, or data logger. Integrating the dBi-M into your existing network is easy and cost-effective. The dBi-M is ready for the most challenging remote applications. The IP68 design enables the unit to be fully submerged, perfect for applications where flooding or surcharging can occur. The dBi-M can be connected to a variety of external wireless telemetry devices featuring open protocol Modbus communications. The ultra-low power consumption of the dBi-M will give you the longest THE RIGHT SENSOR FOR • Event Duration • Tank Level Management • Combined Sewer Overflows • Remote Level deployment time possible, providing data insights for extended periods of time while reducing the need to maintain your data collection system. The dBi-M is a greener solution to remote network monitoring and discharge point monitoring. Designed to fit low-power and low-overhead needs for remote installations, users are able to multidrop up to 120 dBi-M transducers with just a single controller. The open protocol allows for the dBi-M to connect to any Modbus-enabled device, saving thousands on installation costs and labor.

dBi-M INTELLIGENT TR ANSDUCERS HART SERIES Formats to suit your application The dBi Modbus series transducers are available in a range of different formats, designed to be able to meet the needs of your application. Units are available with flanged or front-thread connections for mounting flexibility, PTFE coating for corrosive applications, fitted with a foam face for solids applications, and submergence shields to prevent the face of the transducer from becoming dirty in applications where submergence is common. Calibration and functional elements dBi-M3 MicroFlow-i area velocity The dBi-M...

Technical Specifications PHYSICAL: TRANSDUCER SPECIFIC dBi-M3 Sensor Body Dimensions: Measurement Range: Beam Angle: 3 mm (0.1 in) up to 6 m (19.7 ft) range 6 mm (0.2 in) over 6 m (19.7 ft) range Sensor Body Material: Cable Lengths: Standard: 5 m, 10 m, 20 m, or 30 m (16.4 ft, 32.8 ft, 65.6 ft, or 98.4 ft) Optional up to 150 m (492.1 ft) maximum (increments of 10 m (32.8 ft) only) Mounting Connection: Enclosure Protection: IECEx, UKEx & ATEX Approvals: IP68 / NEMA 6P -40 °C to +80 °C (-40 °F to +176 °F), options for front thread and flange mounting Listed in the Certificate of Conformity within...

TRANSDUCER OPTIONS Front Threaded / PVDF: Submergence Shield: Flanged DIN / ANSI: Foam Face: Sanitary Flange Intrinsically Safe of All the Above: Delivering the Measure of Possibility INFO@PUL SAR ME A SUR EMENT.COM Pulsar Measurement is a trading name of Pulsar Process Measurement Ltd. Copyright © 2021 Pulsar Measurement Registered Address: 1 Chamberlain Square CS, Birmingham B3 3AX Registered No.: 3345604 England & Wales