Catalogs >
Pulsar Measurement >
dBi HART Intelligent Transducers

dBi HART Intelligent Transducers
1 / 4Pages

Catalog excerpts

dBi HART INTELLIGENT TRANSDUCERS Self-contained transducers with HART protocol. Setting new standards in communications and provide convenience for reliable plant and field-based level measurement systems. The dBi HART series of transducers are low power devices featuring Pulsar Measurement’s world-leading DATEM echo processing power for robust and reliable measurement from 125 mm to 15 m (4.9 in to 49.2 ft) depending on the unit chosen. Integration with plant systems and other equipment is straightforward. The dBi HART series support GSD, EDDL, and FDT/DTM making it easy to configure and calibrate the devices using standard PLC/HMI industry protocols. Pulsar Measurement’s software or on-site multi-drop setup provides options to program the transducers using either a standard interface or using Pulsar Measurement’s programming parameters. Formats to Suit Your Application The dBi HART series are available in a range of different formats designed to be able to suit the needs of your application. For example, flanged, PTFE coated for corrosive applications, fitted with foam face for use in solids applications or submergence shield, and with threaded noses for easy installation. THE RIGHT SENSOR FOR • Event Duration • Tank Level Management • Combined Sewer Overflows • Remote Level Tank Shapes & Volume Measurement The dBi HART transducers provide on-board conversion for volume with several pre-set tank shapes, plus the ability to curve-fit to non-standard tank shapes. The output from the unit can be configured to represent distance, level, space, or volume. For solid applications, the dBi HART transducers are compatible with Pulsar Measurement’s aiming kit for the best possible results and to measure right down to the draw-off point of a bin or silo.

Open the catalog to page 1

dBi INTELLIGENT TR ANSDUCERS HART SERIES Functional Qualities dBi Transducers with HART are loop powered (3.8-22mA), IP68 for outdoor applications, temperature compensated for increased accuracy, and make use of the HART Version 7 protocol, with individually addressable transducers. Alternatively, they can be programmed as stand-alone devices using a hand-held calibrator or PC to operate as low-power measuring devices, using HART as the mechanism for data collection. The first boot is approximately 8 seconds, if a typical 15-minute boot interval is used, this becomes approximately 3.5...

Open the catalog to page 2

Technical Specifications PHYSICAL: TRANSDUCER SPECIFIC: dBi3 Sensor Body Dimensions: Measurement Range: Beam Angle: 3 mm (0.1 in) up to 6 m (19.7 ft) range 6 mm (0.2 in) over 6 m (19.7 ft) range Sensor Body Material: Cable Lengths: Standard: 5 m, 10 m, 20 m, or 30 m (16.4 ft, 32.8 ft, 65.6 ft, or 98.4 ft) Optional up to 150 m (492 ft) maximum (increments of 10 m (32.8 ft) only) Mounting Connection: Enclosure Protection: ATEX Approval: IP68 / NEMA 6P -40 °C to +80 °C (-40 °F to +176 °F), options for front thread and flange mounting Listed in the Certificate of Conformity within the manual...

Open the catalog to page 3

TRANSDUCER OPTIONS Front Threaded / PVDF: Submergence Shield: Flanged DIN / ANSI: Foam Face: Sanitary Flange Intrinsically Safe of All the Above: Delivering the Measure of Possibility INFO@PUL SAR ME A SUR EMENT.COM Pulsar Measurement is a trading name of Pulsar Process Measurement, Ltd. Copyright © 2020 Pulsar Measurement Registered Address: 1 Chamberlain Square CS, Birmingham B3 3AX Registered No.: 3345604 England & Wales

Open the catalog to page 4

dBi HART Intelligent Transducers 1 / 4Pages

Catalog excerpts

All Pulsar Measurement catalogs and technical brochures

dBi HART Intelligent Transducers
1 / 4Pages