The Gearchem pumps are designed for continuous on duty use. They are constructed out of the strongest material available to provide superior chemical resistance and assure long life. Designed to handle a variety of process liquids including liquefied gasses, the G2, GA2, and GC2 can handle highly viscous fluids to very thin, clear, non-abrasive fluids. Typically employed to transfer fluids they are equally advantageous in metering fluids because of their consistency. Operating Benefits Gearchem pumps offer laminar flows for consistent, continuous and measurable transfer of liquids. Fully inline serviceable. Do not need to disconnect from piping. Self-priming and bi-directional Closed running and operating clearance evacuate air from the suction piping Can handle clear lubricating and non-lubricating fluids including hydrocarbons and polymers Variety of gears available and easily convertible to satisfy different service conditions All gear materials are non-sparking for use with hazardous fluids Internal sleeve type bearings are lubricated by process fluid eliminating the need for periodic lubrication maintenance and prevents contamination of external lubrication materials Three types of seals and two packing arrangements available Simplified maintenance due to quick disassembly Do not require periodic lubrication, since the pumped fluid provides the necessary lubrication and cooling. Possibility of contamination of pumped fluid is eliminated Bi-directional for easy installation Dual purposed: can be used as either a transfer pump or a metering pump Handles a variety of fluids and viscosities Has superior chemical resistance Aftermarket & Accessory Offerings Bolt-on Heating/Cooling jackets MPC Vector • The MPC VECTOR is an advanced pump controller that is physically separated from the pump's enclosure. Its purpose is to precisely adjust output flow of a process media by means of pump motor speed control, and is designed for a wide variety of control applications. Control Options Pressure Relief Valves Back Pressure Diaphragm Valves Base-Mounted Units

Typical Performance Engineering Data Custom Engineered Designs Casing/Housings: 316SSL, 316 SS, Alloy C, Alloy 20 Drive/Idler Gears: 316SSL, 316 SS, Alloy C, Alloy 20 Shafts: 316SSL, 316 SS, Alloy C, Alloy 20 Bearings: Carbon 72, Carbon 92, Glass-filled PTFE, Silicon Carbide Bearing Type: Internal Sleeve Wearplate: Carbon 72 Bearing Lubrication: By pumped fluid Packing Arrangements: Standard or lantern ring Mechanical Seals: Single internal or double seals to 175 psi. Single external seal to 50 psi. Port Size and Type: .25” NPT or BSPT, .5” 150# ANSI Flange Direction of Rotation: Bi-directional...