SENSOR BOARD FOR DC-UPS SENSOR BOARD FOR BATTERY MODULES Suitable for most of the PULS DC-UPS Control Units Includes a PT1000 Temperature Sensor Includes an Auto-Resettable Fuse for the Center-Tap This sensor board contains a PT1000 temperature sensor and an auto-resettable fuse, which is suitable for charging currents up to 3.5A. The fuse protects the center-tap wire between the battery module and the DC-UPS control unit. The UZS24.100 is compatible with most of the PULS DC-UPS control units and enables all the benefits of the PULS 1- Battery-Concept. This makes the use of matched replacement batteries unnecessary and allows a precise battery charging and testing which results in the longest possible battery life. UZS24.100 Sensor board comprising a PT1000 temperature sensor and an auto-resettable center-tap fuse All parameters are specified at 25°C ambient unless otherwise noted.

UZS24.100 SENSOR BOARD FOR DC-UPS 3. INSTALLATION AND WIRING The sensor board shall be installed close to the batteries in order for a precise temperature measurement of the batteries. A Temperature Sensor Connect pin 11 (Temp.) and pin 12 (RTN) to the corresponding pins on the DC-UPS control unit. The temperature sensor is a PT1000 sensor with SMD technology, which is placed close to the terminal block. Center-tap Connect pin 13 (Center-Tap) to the corresponding pin on the DC-UPS control unit. Connecting the center-tap wire to the DC-UPS control unit enables all the benefits of the PULS 1-Battery-Concept....

SENSOR BOARD FOR DC-UPS The screw terminals are IP20 Finger safe constructed and suitable for field and factory wiring. American Wire Gauge AWG 20-12 Wire stripping length Recommended tightening torque 0.5Nm / 4lb-in The CE mark indicates conformance with the I 6. PHYSICAL DIMENSIONS AND WEIGHT Wire length Wire length: The information presented in this document is believed to be accurate and reliable and may change without notice. No part of this document may be reproduced or utilized in any form without permission in writing from the publisher. All parameters are specified at 25°C ambient unless...