CP Series | 120, 240, 480W | DIN rail power supplies Efficient. Compact. Reliable.

Efficient. Compact. Reliable. The PULS CP series breaks all records in terms of efficiency, lifetime and dimensions. Using the latest power electronic technologies and highly sophisticated thermal design, this series sets new benchmarks in the field of single phase DIN rail power supplies. Lowest power losses, breakthrough space- saving design and long product lifetime deliver the lowest cost of ownership to the customer. Well suited for a wide range of international applications, the CP series comes with a variety of output voltage options and complies fully with the demands of hazardous locations...

All parameters are specified at nominal values, 230Vac, 50Hz, +25°C ambient temperature and 5 minutes run-in time unless otherwise noted. Technical data is subject to change without notice. 1) With integrated shut down input. 2) With extended DC input voltage range. General data for all units Power reserves Connection type Operating temp. range Output derating Humidity Altitude (with derating) Shock test Harmonic current emissions Overload protection DC-OK relay contact Warranty 20% continuous < +45°C short-term from +45°C up to +60°C screw terminals max. wire diameter (incl. ferrules) 2.8mm -25°C...

General data for all units Power reserves Connection type Operating temp. range Output derating Humidity Altitude (with derating) Shock test Harmonic current emissions Overload protection DC-OK relay contact Warranty 20% continuous < +45°C short-term from +45°C up to +60°C screw terminals max. wire diameter (incl. ferrules) 2.8mm -25°C to +70°C 2.5% / K from +60°C 5% to 95% r. h. 0 to 2000m (up to 6000m) 30G 6ms, 20G 11ms according IEC60068-2-27 according EN 61000-3-2, Class A, C *) Hiccupplus <13V integrated 3 years IECEE lECEx Cfi Scheme || 3G Ex riA riC II T4 G.: ') See details in data...

Screwless terminal options Spring-clamp and push-in terminals are an efficient alternative to the traditional screw terminal connections allowing time-saving installation without the need for tools. Conformal coating A specially applied protective coating protects internal electronic components from moisture, dust, extreme shocks and vibration. For medical applications These power supplies are 100% convection cooled, highly efficient, reliable and certified according to IEC 60601-1 3rd edition, 2 MOPP (Means Of Patient Protection) and IEC 60601-1-2 4th edition (EMC). For railway applications...

Performance and quality benchmarks Data for 24V versions MEAN WELL Width / Depth Minimum lifetime Width / Depth Minimum lifetime Width / Depth TRIO SITOP Minimum lifetime All data are based on laboratory assessments and the technical measurements were conducted under equal conditions: 230Vac / Full load / +40°C

Benefits at a glance 480W power supply in Reduces system costs Thanks to a high power density and small size, CP power supplies save valuable space in the cabinet. They can provide up to 20% power boost continuously for ambient temperatures below +45°C; and short-term from +45°C up to +60°C. The screwless spring-clamp and push-in terminals reduce installation time and the low inrush current saves costs on fuses and switches. Minimum lifetime Improves process uptime Due to very low heat losses, electronic components are under signifi- in addition reduces cooling energy required for the system....