Catalogs >
PULS GmbH >
CP10.241-S1

CP10.241-S1
27Pages

Catalog excerpts

POWER SUPPLY AC 100-240V Wide-range Input Width only 39mm Optional with Spring-clamp Terminals (CP10.241-S1) Optional with Extended DC Input Range (CP10.242) Efficiency up to 95.2%, Excellent Partial Load Efficiency 20% Output Power Reserves Safe HiccupPLUS Overload Mode Easy Fuse Breaking due to High Overload Peak Current Active Power Factor Correction (PFC) Minimal Inrush Current Surge Full Power Between -25°C and +60°C DC-OK Relay Contact Meets ITE, ATEX, Class I Div2 and SEMI F47 Requirements 3 Year Warranty GENERAL DESCRIPTION SHORT-FORM DATA The DIMENSION CP-Series units are high-end power supplies in a medium price range without compromising quality, reliability and performance. The CP-Series is part of the DIMENSION power supply family. The most outstanding features of CP10.241 are the high efficiency, advanced inrush current limitation, active PFC and the wide operational temperature range. High immunity to transients and power surges as well as low electromagnetic emission, a DC-OK relay contact and a large international approval package for a variety of applications makes this unit suitable for nearly every situation. Output voltage DC 24V Adjustment range 24 – 28V Output current 10A 12A 8.6A 10.3A Output power 240W / 288W Output ripple < 50mVpp AC Input voltage AC 100-240V Mains frequency 50-60Hz AC Input current 2.15 / 1.13A Power factor 0.99 / 0.97 AC Inrush current 6 / 9A pk DC Input DC 110-150V ±20% DC 110-300V ±20% Efficiency 93.6 / 95.2% Losses 16.4 / 12.1W Temp. range -25°C to +70°C Derating 6W/°C Hold-up time 37 / 37ms Dimensions 39x124x117mm Weight 600g / 1.3lb ORDER NUMBERS The CP-Series includes all the essential basic functions. The devices have a power reserve of 20% included, which may even be used continuously at temperatures up to +45°C. Additionally, the CP10 can deliver three times the nominal output current for at least 12ms which helps to trip fuses on faulty output branches. The CP10.241-S1 is equipped with quick-connect springclamp terminals for a fast and reliable electrical connection. Spring-clamp terminals are the preferred terminals when applications are exposed to mechanical vibration. Power Supply 24-28V Standard unit With Extended DC Input (DC 110-300V) CP10.241-S1 24-28V with spring-clamp terminals ZM12.SIDE YR40.242 Side mount bracket Redundancy module Marine, planned Feb. 2016 / Rev. 1.3 DS-CP10.241-EN All parameters are specified at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone +49 89 9278

Open the catalog to page 1

The information presented in this document is believed to be accurate and reliable and may change without notice. No part of this document may be reproduced or utilized in any form without permission in writing from the publisher. PE is the abbreviation for Protective Earth and has the same meaning as the symbol Earth, Ground This document uses the term “earth” which is the same as the U.S. term “ground”. To be defined, value or description will follow later. A figure displayed with the AC or DC before the value represents a nominal voltage with standard tolerances (usually ±15%) included....

Open the catalog to page 2

1. INTENDED USE This device is designed for installation in an enclosure and is intended for the general professional use such as in industrial control, office, communication, and instrumentation equipment. Do not use this power supply in equipment, where malfunction may cause severe personal injury or threaten human life. 2. INSTALLATION REQUIREMENTS This device may only be installed and put into operation by qualified personnel. This device does not contain serviceable parts. The tripping of an internal fuse is caused by an internal defect. If damage or malfunction should occur during...

Open the catalog to page 3

3. AC-INPUT AC input AC input range Shut-down voltage External input protection nom. AC 100-240V suitable for TN-, TT- and IT mains networks min. 85-264Vac continuous operation min. 264-300Vac < 500ms max. 300Vac continuous, IEC 62103 nom. 50–60Hz ±6% typ. 80Vac steady-state value, see Fig. 3-1 typ. 55Vac dynamic value (250ms) typ. 70Vac steady-state value, see Fig. 3-1 See recommendations in chapter 23.3. Input current Power factor*) Crest factor**) Start-up delay Rise time Allowed voltage L or N to earth Input frequency Turn-on voltage Turn-on overshoot External input protection at 24V,...

Open the catalog to page 4

Fig. 3-3 Input current vs. output current at 24V output voltage Fig. 3-4 Power factor vs. output current at 24V output voltage Output Current 4. DC-INPUT DC input DC input range DC input current Allowed Voltage L/N to Earth Turn-on voltage Shut-down voltage CP10.241, CP10.241-S1 CP10.242 CP10.241, CP10.241-S1, continuous operation CP10.242 at 110Vdc, at 24V, 10A at 300Vdc, at 24V, 10A, CP10.242 continuous, IEC 62103 steady state value steady state value Instructions for DC use: a) Use a battery or a similar DC source. A supply from the intermediate DC-bus of a frequency converter is not...

Open the catalog to page 5

□innerusioru cp-senes 24V, IOA, SINGLE PHASE INPUT I 5. INPUT INRUSH CURRENT_ An active inrush limitation circuit (NTCs, which are bypassed by a relay contact) limits the input inrush current after turn-on of the input voltage. The charging current into EMI suppression capacitors is disregarded in the first microseconds after switch-on. Inrush current max. 11Apeak 7Apeak 11Apeak at 40°C, cold start Inrush energy max. 0.1A2s 0.1 A2s 0.4A2s at 40°C, cold start Fig. 5-1 Typical turn-on behaviour at nominal load, 120Vac input and 25°C ambient All parameters are specified at 24V, 10A, 230Vac,...

Open the catalog to page 6

6. OUTPUT Output voltage Adjustment range Factory settings Line regulation Load regulation Ripple and noise voltage Output current Output power Overload behaviour Short-circuit current Output capacitance guaranteed at clockwise end position of potentiometer ±0.2%, at full load and cold unit 85-300Vac static value, 0A 10A; see Fig. 6-1 20Hz to 20MHz, 50Ohm at 24V, ambient temperature <60°C, see Fig. 6-1 at 24V, ambient temperature <45°C, see Fig. 15-1 at 24V and 70°C ambient temperature, see Fig. 15-1 at 28V, ambient temperature <60°C, see Fig. 6-1 at 28V, ambient temperature <45°C, see Fig....

Open the catalog to page 7