Specifications:
The document outlines the specifications for water jetting equipment, including various models such as MP, HP, and HPX. Key parameters include flow rates and pressures, with values ranging from 103 l/min at 2500 bar to 1913 l/min at 145 bar. Power is consistently 680 CV/HP or 500 kW across models.

Control Board:
The control board features standard engine stop functions for low oil pressure and high oil/water temperature, along with indicators for oil pressure and water/oil temperature. It includes RPM/hours counters, a starter key, and a manual accelerator.

Transmission:
The transmission is direct via an axial gear coupling joint.

Pressure Regulator:
Pressure is manually regulated by engine RPM.

Base Frame:
The base frame is constructed from rectangular steel tubing with supports and rubber stoppers, treated with antirust primer and high-quality paint.

Pump:
The pump is a triplex horizontal type with ceramic plungers and a cooling system for pressures above 1000 bar. It features forced lubrication and a stainless steel head.

Motor:
The motor is a VOLVO TAD 1643, turbo intercooler, water-cooled, meeting EPA Tier III emission standards. RPM calibration is set at 2100 rpm.

Optional Components:
Optional components include a trolley, cover, soundproof insulation, water filtration system, suction stabilizer, booster pump, and additional control boards. An Atex/Ex version and equivalent engine types are available on request.