Specifications:
The document provides detailed specifications for water jetting equipment models PTC 7D, MP, HP, and HPX. Key parameters include flow rates and pressures, with values such as 1310 l/min at 140 bar and 70 l/min at 2500 bar. Power ratings are provided, with engines delivering up to 476 CV/HP (350 kW) and 544 CV/HP (400 kW).

Control Board:
The control board features standard engine stop functions for low oil pressure and high oil/water temperature, along with indicators for oil pressure and water/oil temperature. It includes RPM/hours counters, a starter key, and a manual accelerator.

Transmission and Pressure Regulation:
Transmission is direct via an axial gear coupling joint. Pressure regulation is manual, controlled by engine RPM.

Base Frame:
The base frame is constructed from rectangular steel tubing with supports and rubber stoppers, treated with antirust primer and high-quality paint. It includes four eyebolts for lifting.

Weight and Dimensions:
The equipment weighs between 4700 Kg (10362 lbs) and 4800 Kg (10582 lbs), with dimensions of 402 cm x 215 cm x 200 cm (158.2 inch x 84.6 inch x 78.7 inch).

Pump Details:
The pump is a triplex horizontal type with ceramic plungers and a cooling system for pressures above 1000 bar. It features forced lubrication and a stainless steel head.

Motor Specifications:
The motors are IVECO C13ENT and VOLVO TAD 1641, both turbo intercooler and water-cooled, meeting EPA Tier III emission standards. Maximum power outputs are 375 kW and 406 kW, respectively.

Optional Components:
Optional components include a trolley, cover, soundproof insulation, water filtration system, suction stabilizer, booster pump, and additional control boards. Equivalent engine types and Atex/Ex versions are available upon request.

Performance Charts:
The document includes performance charts for different models, showing flow rates and pressures at various RPMs, highlighting the equipment's capabilities across different operational conditions.