Specifications:
The document details various models of water jetting equipment, specifically the MP, HP, and HPX models. These models have different flow rates and pressures, ranging from 1148 l/min at 115 bar to 41 l/min at 2800 bar. The power output for all models is 340 HP (250 kW).

Control Board:
The equipment features a control board with a Star-Delta starter or an inverter starter, low tension controls, start/stop push buttons, warning lights, and an emergency stop button.

Transmission:
The transmission is direct via an axial gear coupling joint.

Pressure Regulator:
The pressure regulator is manual with an on/off bypass.

Base Frame:
The base frame is constructed from rectangular steel tubing with supports and rubber stoppers, treated with antirust primer and high-quality paint.

Weight and Dimensions:
The equipment weighs 2800 kg (6173 lbs) and measures 300 cm x 160 cm x 160 cm (118.1 inch x 63.0 inch x 63.0 inch).

Pump:
The pump is a triplex horizontal type with special ceramic plungers and a cooling system for pressures above 1000 bar. It includes forced lubrication and a stainless steel head.

Safety Features:
The equipment includes a CE-compliant safety valve and a stainless steel gauge filled with glycerin.

Motor:
The motor is an asynchronous, 3-phase, 4-pole type with 400V@50Hz, air-cooled, efficiency IE2, B3 form, F/B class insulation, and IP55 protection. The maximum power is 250 kW at 1500 rpm.

Optional Components:
Optional components include a trolley, cover, soundproof insulation, water filtration system, suction stabilizer, booster pump, external tank, and additional control boards. Special starters with inverter or Soft Start are available. The equipment is also available in an Atex/Ex version.