Specifications:
The document outlines the specifications for various water jetting equipment models, including MP, HP, and HPX. Key parameters include flow rates and pressures: 522 l/min at 150 bar, 160 l/min at 490 bar, 71 l/min at 1100 bar, 198 l/min at 400 bar, 84 l/min at 950 bar, and 28 l/min at 2500 bar. The power output is consistently 217 CV/HP or 160 kW across models.

Control Board:
Features include a Star-Delta starter with low tension controls, start/stop push buttons, warning lights, and an emergency stop button. An alternative starter with an inverter is also available.

Transmission:
Utilizes a direct axial gear coupling joint.

Pressure Regulator:
Manual on/off and bypass options are available.

Base Frame:
Constructed from rectangular steel tubing with supports and rubber stoppers, treated with antirust primer and high-quality paint. It includes four eyebolts for lifting.

Units:
The equipment weighs 2200 Kg (4850 lbs) and measures 225 cm x 140 cm x 120 cm (88.5 inch x 55.1 inch x 47.2 inch).

Pump:
Features a triplex horizontal pump with special ceramic plungers and a cooling system for pressures above 1000 bar. It includes forced lubrication and a stainless steel head.

Safety Valve:
Complies with CE norms.

Gauge:
Made of stainless steel filled with glycerin.

Motor:
Asynchronous, 3-phase/4 poles, 400V@50Hz, air-cooled, efficiency IE2, B3 form, F/B class insulation, IP55 protection. Maximum power is 160 kW at 1500 rpm.

Optional Components:
Options include a trolley, cover, soundproof insulation, water filtration system, suction stabilizer, booster pump, external tank, additional control boards, and special starters with inverter or Soft Start. Available in Atex/Ex version.