Specifications:
The water jetting equipment operates at various flow rates and pressures: 70 l/min at 280 bar (18.0 US gpm at 3900 psi), 19 l/min at 1000 bar (5.0 US gpm at 14500 psi), and 30 l/min at 600 bar (8.0 US gpm at 8700 psi). The power output is 50 HP (37 kW).

Control Board:
Features include an engine start key, digital hours counter, and a power box for voltage and current stabilization. It also monitors engine head temperature and stops the engine for low oil pressure or high head temperature.

Transmission:
Utilizes a belt drive and pulley system with a protective cover.

Pressure Regulator:
Manual operation.

Base Frame:
Constructed from rectangular steel tubing with rubber stoppers and treated with antirust primer and high-quality paint. Includes four eyebolts for lifting.

Optional Components:
Trolley, cover, soundproof insulation, water filtration system, suction stabilizer, additional control boards, and equivalent engine types on request. Atex/Ex version available.

Unit Specifications:
Weight: 690 Kg (1522 lbs). Dimensions: 160 cm x 100 cm x 120 cm (63 inch x 39.5 inch x 47.2 inch). Battery: 1x100 Ah, 12Vdc automotive type.

Pump:
Triplex horizontal pump with ceramic-coated steel plungers and splash-type lubrication. Stainless steel head and CE standard safety valve.

Motor:
HATZ 3L41C, aspirated, soundproofed, air-cooled with electric starter. Emission level: EPA Tier II. Max power: 38 kW, calibrated at 2300 rpm.

Performance Graphs:
The document includes performance graphs showing pressure (bar) versus flow rate (l/min) for different models and configurations.