SPECIAL SERIES Easy PowerXL New 30 kW high-pressure water jetting units

Water jetting equipment Water Jetting Equipment Easy Power XL: the best answer More power for fast and effective

to all your requirements operations GENERAL FEATURES Sturdy painted tubular frame with anti-corrosion treatment Ergonomic grips for easier manoeuvrability AISI 304 stainless-steel coated panels Practical housings for gun and lance 2 x ø 400 solid wheels with steel hub and ball bearings + 2 castor wheels with brake Asynchronous three-phase 30 kW 4-pole (1400 rpm) high-efficiency IE3 motor Flexible motor-pump coupling joint Industrial low-voltage (24V) ignition panel with star-delta ignition and 10 metres of power cable Remote switch with thermal magnetic relay for motor protection Rotating master...

The power of a system in a compa Utmost mobility and versatility

pact high-pressure cleaner in every application High-pressure cleaning companies Building sites and boatyards Iron and steel works and mechanical engineering firms Food-industry companies Oil, chemical and energy companies MAIN APPLICATIONS Removal of paint, rust and graffiti from steel and/or concrete surfaces Cleaning building scaffolding Removal of scale deposits and/or marine fouling Cleaning ships’ decks Cleaning ships’ holds

STANDARD FEATURES HPP ELHR 38/500 and ELHR 30/600 pumps Direct water suction DN100 pressure gauge with S/S casing (full scale 1000 bar) Unloader valve VHP70 in stainless steel with pressure release (reset at 50% of set pressure) Safety valve SVL70 in stainless steel 100 mesh water filter at pump inlet with controllable cartridge No-water alarm pressure switch (set at 1 bar) OPTIONAL FEATURES Available in 60 Hz version Total-Stop “Double use” version (two 15/500 delivery hoses on each branch) Remote cable emergency stop Pump oil over-temperature alarm thermostat Water can with booster pump STANDARD...

STANDARD FEATURES HPP EVR 20/800 and 15/1000 pumps Suction from S/S internal water can with 55 litre capacity by means of electric booster pump with S/S impeller (*) DN100 pressure gauge with S/S casing (full scale 1600 bar) S/S pressure adjustment valve HPP RP06 with hand-wheel and bypass drain in can Safety valve with rupture disc (1000 bar on 20/800 – 1250 bar on 15/1000 bar) 100 mesh water filter at can inlet with controllable cartridge. 20 micron HPP FP03 S/S water filter at pump inlet (booster outlet) No-water alarm pressure switch (set at 2.5 bar) Locking collars according to EN 1829-2...

P.T.C. srl Via F.lli Canepa, 132 F › 16152 Genova (Italy) tel: +39 010 6509422 › fax: +39 010 6509406 [email protected] › www.ptcitaliana.com