*mydirectindustry

PT9011OVL

Product catalog summary

Overview: The PT9011OVL is an onboard vehicle load cell designed for easy installation and is sealed to IP67 standards, making it ideal for truck/trailer and agricultural weighing applications.

Specifications:

Signal Output at capacity: 1.25±10% mV/V
Service Load: 100% Capacity
Combined Error: < 1.000% FSO
Safe Load: 120% Capacity
Zero Balance: < 2% Capacity
Ultimate Load: 150% Capacity
Fixing Torque: 230Nm/170ft-lb
Input Resistance: 387Ω ± 25Ω
Operating Temperature Range: -35 ~ +70°C
Output Resistance: 350Ω ± 3.5Ω
Storage Temperature Range: -40 ~ +80°C
Insulation Resistance: > 5000 MΩ (@50 VDC)
Compensated Temperature Range: -10 ~ +40°C
Excitation Voltage (Recommended): 5~12 V AC/DC
Excitation Voltage (Max): 18 V AC/DC
Cable Type: 4 core shielded, PUR sheath
Cable Diameter/Length: 5.0mm, 10m long
Material: Nickel Plated Alloy Steel

Installation: The PT9011OVL can be adapted to various installations, including industrial applications and monitoring shaft loads. It can support hydraulic lifting rams on tipping trucks, carry bolster frames on logging trucks, and be used in axle weighing for agricultural applications. Safety considerations are crucial, and backup mechanisms can be provided if needed.

Safety and Usage Recommendations:

Ensure safety measures to prevent load cell fracture in case of accidents.
Avoid twisting about the long axis, especially during braking.
For maximum service, ensure P + 7.41*M < 15000 kgf.
Under normal use, a safety factor of 1.2 is recommended, ensuring P + 7.41*M < 12500 kgf.

Catalog excerpts

PT9011OVL ONBOARD VEHICLE LOAD CELL Easy installation Sealed to IP67 standards Ideal for truck/trailer onboard weighing Suitable for agricultural weighing

Open the catalog to page 1

PT9011OVL Installation The PT9011OVL is easily adapted to a range of installations, some are illustrated below. These illustrations are only a few of the possible applications. The PT9011OVL can equally be used in industrial applications and is well suited for monitoring shaft loads where the bearing housing bolts to the load cell. The diagram to the left shows the PT9011OVL supporting the hydraulic lifting ram on a tipping truck. The load cell mounts to a bracket on the chassis of the vehicle and carries the ram support bearing. Depending upon the situation the bracket may be welded or bolted...

Open the catalog to page 2

All PT Limited catalogs and technical brochures

Archived catalogs

Load cell & Accessory catalogue
44 Pages