Innovative Measurement Electronics MULTI FUNCTION WEIGHT INDICATOR PT600R The PT600R series indicators feature a totally new design concept combined with many important technological improvements that are totally new to the weighing industry. The exceptionally large LCD display (29mm main digits) is complemented by super-bright LED backlighting to ensure easy reading in all lighting conditions (including bright sunlight). Power Supply Back Shell & Desk Stand Single Module The silicone keypads offer superb feedback with a precise soft-touch operation. There are three assignable function keys to alleviate confusion when performing special keystroke operations. Accepts optional modules Adjustable printing formats Totalising & counting Transorb protected L/C input On-board serial outputs Adjustable conversion factors Materials Testing LARGE multi-line display Batching & grading SPECIFICATIONS Due to PT’s policy of continuous development, these specifications are subject to change without notice. Resolution _______ Up to 100,000 Divisions. Minimum of 0.25µV/Division Zero Cancellation ________________________________________± 2mV/V Span Adjustment ________________________________0.1mV/V ~ 3mV/V Stability/Drift ________________ Zero < 0.1µV/°C (+8ppm Deadload Max) Span < 8ppm/°C Linearity < 20ppm Noise < 0.2µVp-p Excitation ___________ 7.4V for up to 16 x 350 or 32 x 700Ω Load Cells (4-wire or 6-wire plus shield) Maximum Total Load Cell Resistance: 1,000Ω A/D Type _________ 24bit Sigma Delta with ± 8,388,608 Internal Counts Operating Environment ______________-10 ~ 50°C Ambient Temperature < 90% Non-Condensing Humidity -20 ~ 50°C Ambient Storage IP55 when panel mounted, or with rear boot (otherwise IP40) Case Materials ___ ABS, Silicone Rubber, Nylon, Acrylic (no halogen used) Packing Weights _______________________________Basic Indicator 0.6kg Battery Backed Clock Calendar _________ Battery Life 10 Years Minimum LCD with 4 Alpha-numeric Displays _______________________ LED Backlit Primary Display: 6 x 28.4mm High Digits With Units & Annunciators 2nd Display: 9 x 17.6mm digits with units 3rd Display: 8 x 6.1mm digits 4th Display: 4x7.6mm digits Setup & Calibration _____ Full Digital. Visual Prompting In Plain Messages Digital Filter _______________ Sliding Window Average 0.1 ~ 30 seconds Zero Range ______________________ Adjustable ±2 ~ 20% Full Capacity Standard Power Input _____________________12 ~ 24V DC (15 VA max) ON/OFF Key With Memory Feature Variants __________110/240V AC 50/60HZ Input 12V DC 15VA Output Optical Data Communications ____________ Magnetically coupled optical communications support with opptional conversion cable which connects directly into a standard RS-232 Port Correction _____________________________ Ten Point Linearity Correction Serial Outputs (Standard) ______ RS-485 transmit only for remote display RS-232 serial port for remote display, network or printer supports Transmission rate: 2400, 4800, 9600 or 19200 Baud Assignable Funcion Keys _____________Printing, Unit Switching, Counting, Manual Hold, Peak Hold, Totalising

ORDERING INFORMATION Part Number EP600RI0000XXX EP600RI0010XXX EP600RI0020XXX Pre-configured Models PT600R Weighbridge Configuration OPTIONS Desk Mount (Back Shell & Desk Stand) Wall/Pole Bracket RS232 Option (RS232/RS232 Isolated) RS485 Option (RS485/RS485 Isolated) RS232/RS485 Option (RS232/RS485 Isolated) Transistor Digital I/O (8 Isolated I/O) MODEL PT600R Modular Indicator 12 ~ 24V DC Panel Mount PT600R Modular Indicator 12 ~ 24V DC Desk Mount PT600R Modular Indicator Mains Power Desk Mount User configured Input or Output Pre-configured with EP600RI0020XXX + EO600RIOP3XDIO Pre-configured...