*mydirectindustry

Catalogs
PT Limited
PT320BC BATCHING CONTROLLER

PT320BC BATCHING CONTROLLER

Product catalog summary

Overview: The PT320BC is a compact batching controller designed for precise material batching with a 4-component single bin system. It features built-in serial communications and optional analogue outputs for enhanced functionality.

Key Features:

Compact size with dimensions of ¼ DIN 96x48mm.
Dual display for gross and net weights simultaneously.
Programmable start conditions, automatic tare, and tare check cycles.
Re-batch capability if the actual batched value is less than the setpoint.
Front panel entry and retention of setpoints during power down.
Discharge control and out-of-tolerance checking.
Batch report printout and data setting via RS232/485.
Automatic zero on power-up and digital software calibration.
Dribble flow control for accurate batching with coarse feed, fine feed, and free fall compensation.

Specifications:

Maximum display resolution: 15000.
Mains supply: 110 or 220VAC 50/60Hz.
Scale range: 500 to 100000.
Power consumption: 9 VA.
Linearity error: < 0.0067% FSO.
Excitation voltage: 10 Vdc, 150 mA max.
Conversion rate: 200 times per second.
Operating temperature range: -10 ~ 50°C (14~122ºF).
Relative humidity: 90% non-condensing.
Switching capacity: 80V 0.3A max.
Weight: 1 kg.
Built-in RS232/485 communication.
Optional analogue outputs: 0~5V, 4~20mA, 0~20mA.

Ordering Information: The PT320BC can be ordered with optional analogue outputs, which must be factory fitted. The part numbers for these options are EO220MIOP5X10V for 0~5V output and EO220MIOP4X420 for 0~20mA, 4~20mA outputs.

Catalog excerpts

.êett&t, voûte deUyn! Innovative Measurement Electronics BATCHING CONTROLLER Compact Size # Built in serial communications # Optional analogue output Higher A/D conversion rate Higher display resolution Integrated weight and setpoint controller The batching result can be held by function setting Start condition is programmable by function setting Automatic tare is programmable by function setting # Tare check cycle is programmable by function setting Compare check cycle is programmable by function setting Compare inhibit timer separated from coarse and fine interchange # Re-batch is possible when actual batched value is less than the setpoint Dual Display gross and net simultaneously # Complete material batching function # Front panel entry of setpoints Setpoints saved during power down Discharge control provided # Batch report printout Data setting through RS232/485 0 Automatic zero on power up possible Functions software programmable >J Digital software calibration # Easy access rear plug connectors Dribble flow control for more accurate Coarse feed, fine feed and free fall Analogue output 0~20ma, 4~20mA (option only).E0220MIOP4X420 Operating Temperature Range... .-10 ~ 50 C (14-122°F) Note: the analogue options must be factory fitted and ordered with the PT320BC

Open the catalog to page 1

All PT Limited catalogs and technical brochures

Archived catalogs

Load cell & Accessory catalogue
44 Pages