LPCS

LPCS

Product catalog summary
Overview: The LPCS Universal Tension/Compression device is constructed from welded stainless steel, making it ideal for materials testing, overhead, and low-profile weighing. It is designed to be rugged with a high overload capacity and features standard mountings that replace LPC and other market leaders. The device includes recessed holes for flush mounting and a standard IP67 M12 sensor connector.
Dimensions and Capacities: The device is available in various capacities ranging from 1 ton to 100 tons, with specific dimensions and mounting hole configurations for each capacity. The dimensions are provided in millimeters and kilograms.
Specifications: Key specifications include a signal output at capacity of 2±0.01 mV/V, a service load of 100% capacity, and a safe load of 150% capacity. The device has a linearity error of less than 0.05% FSO, non-repeatability of less than 0.020% FSO, and a combined error of less than 0.050% FSO. It can withstand an ultimate load of 300% capacity.
Electrical Characteristics: The input resistance is 750 ± 5 ohms, and the output resistance is 700 ± 3 ohms. The zero balance is less than 2% capacity, and the insulation resistance is greater than 5000 M ohms at 50 VDC. The excitation voltage recommended is between 5 to 15 V AC/DC, with a maximum of 20 V AC/DC.
Temperature and Environmental Conditions: The operating temperature range is -35 to 65°C, with a compensated temperature range of -10 to 50°C and a storage temperature range of -50 to 85°C. The device is sealed to IP67 standards and is made entirely of stainless steel.
Connector and Wiring: The device uses an M12 sensor type connector with specific pin assignments for excitation and signal.
See more

Catalog excerpts

LPCS-1

fatten, vttfae 6y deU^nl Innovative Measurement Electronics UNIVERSAL TENSION/COMPRESSION J Welded stainless steel construction J Ideal for materials testing, overhead and J Rugged with high overload capacity j other market leaders J Recessed holes for flush mounting J Standard IP67 M12 sensor connector NOTE:dimensions are in mm/kg. LPCS supplied with straight mating connector without cable. Specifications with factory fitted base.

 Open the catalog to page 1

All PT Limited catalogs and technical brochures

  1. PT100SSB

    3  Pages

  2. PT9011OVL

    2  Pages

  3. PT321

    2  Pages

  4. PT200M/P

    4  Pages

  5. PT100LC

    2  Pages

  6. RD3

    42  Pages

  7. RD4/5/6

    1  Page

  8. PT252 series

    2  Pages

  9. PT630 series

    4  Pages

  10. PT620

    4  Pages

  11. PT610

    4  Pages

  12. PTASP6-N

    1  Page

  13. PTASP6-E3

    1  Page

  14. HPT02

    1  Page

  15. HPT03

    1  Page

  16. HPT04

    1  Page

  17. PT113

    2  Pages

  18. PT253

    2  Pages

  19. PT200MB

    2  Pages

  20. PT210

    2  Pages

  21. SSC Brochure

    2  Pages

  22. ST Brochure

    2  Pages

  23. LS Shearbeam

    2  Pages

  24. LPX

    2  Pages

  25. LPCH

    2  Pages

  26. PSB

    2  Pages

  27. LPC

    2  Pages

  28. Model ST

    2  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.