Building cables Optical cable For indoor and outdoor installation. Cable design_ • Central Strength Member (CSM). • Loose Tube containing fibres and filled with a suitable water tightness compound. • Loose tubes SZ stranded around the CSM. • Longitudinal Water Tightness: dry core with water swellable elements. • Peripheral Strength Elements • Outer Sheath: HFFR.BIack. Indoor/outdoor installation. - Suitable for installation in buildings and tunnel backbones where zero halogen, flame retardance and low smoke emission are required. - Those cables may be installed as well in the outside plant as inside buildings. Static cable bending radius 15 x cable diameter Technical data International standards ITU-T Rec. G.650; ITU-T Rec. G.652; ITU-T Rec. G.655; ITU-T Rec. G.656; © PRYSMIAN GROUP 2012, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group.