Marking Windows 100mm x 100mm 150mm x 150mm 300mm x 150mm Component heights up to 375mm Market leading, precision benchtop dot peen marking machine. Standard 4000 embedded controller provides full range of marking and control features. Powerful PC based software package enables customised operator interface, password control, integrated vision systems, component traceability and networking. Optional large marking areas, automatic part sensing and adjustment of marking gap ensures fully repeatable mark depth, quality and size. Verification cameras can be integrated for 1-step marking, validation and verification. STANDARD FEATURES (MCYBD1010E) • Aerospace, including specific marking and verification standards, e.g. JES131, MIL-STD-130, ISO16022 • Automotive, Rail, Oil & Gas • High precision marking • Safety critical components • Machine readable marking with 100% verification check • Larger, flat components • 4000 Embedded Controller • I/O card for 8 inputs, 6 outputs • Electromagnetic solenoid driven Dot Peen marking • 100mm x 100mm marking area • Flat, machined base for easy fixture mounting • 90° stylus, 100mm long, 4mm diameter, carbide tip • Emergency stop built into controller • LED lighting integrated under head cover Benefits / Requirements Option code Powered Z-axis, Autosense 150 x 150mm marking area 300 x 150mm marking area PC based software control Column extension - 110mm Column extension - 200mm Alternate nosepiece / stylus Integrated camera Programmable height gives precise, repeatable marking force_OPTBDZA Larger marking head for increased markable area_MCYBD1515 Larger marking head for increased markable area._MCYBD3015 Drag and drop editor, user admin rights, connectivity_OPTM2019A Increases column height and maximum component height by 110mm_OPTBDCE110 Increases column height and maximum component height by 200mm_OPTBDCE200 Wider / shallower tip angle, IAQG spec, longer_-_ Verification of mark quality; requires PC and software OPTVISRS/VS Automatic alignment of mark against existing features

BenchDot 300-150 All measurements in millimetres unless otherwise stated COMPATIBLE ACCESSORIES Product Code T-slotted base - extrudedFor attaching fixtures to the base; extruded aluminium 45mm pitchACCBDTB01 T-slotted base - machinedSolid, machined base with 2 slots, 158.7mm pitchACCBDTB02 Single label fixtureFor right angled labels/parts 35-100mm x 20-75mm x 0.5-2.0mmACCBDFX Magnetic clampFor flat parts. Area 184mm x 100mm. Holding force 80N/cm2ACCBDMC Magnetic V shaped clampCylindrical parts diameters 5-70mm, includes machine base adaptorACCBDMV Circumferential axis - Standard Marking round...