Compact chain-type bracket ALI 2.891 set Universal mounting for OPTALIGN® and ROTALIGN® ♦ Mounts in less than a minute! ♦ Fits shaft and coupling diameters of Readily-available replacement parts This universal bracket set contains all parts needed for quick, rigid mounting of the mea- surement components. It fits onto nearly any shaft or coupling approx. 15 mm to 500 mm / 5/8" to 20" in diameter. Easily mounts in less ALI 2.891 set consists of the following individual Bracket frame w/hex key (2 pes) Support posts, 4 pes. each: Storage pouch For detailed information, please consult the Alignment Product Catalog ALI 9.300 available from your local PRÜFTECHNIK AG distributor or from our web site at http://www.pruftechnik.com. PRÜFTECHNIK Alignment Systems eMail: [email protected] Productive maintenance technology

Compact magnetic bracket ALI 2.112set Instant mounting for OPTALIGN® and ROTALIGN® ♦ Magnetic mounting is fastest, easiest ♦ Fits onto any ferromagnetic surface ♦ Extremely rigid, but simple to adjust Instant mounting on any ferromagnetic surface: just place the timesaving ALI 2.112 compact magnetic brackets onto coupling flanges or shaft faces and you're all set! Four powerful magnets hold sensors rigidly in place for measurement - even on narrow coupling flanges - yet allow extremely easy, flexible adjustment. Weight, w/case For detailed information, please consult the Alignment Product Catalog...

Magnetic sliding bracket Perfect for aligning stationary shafts ♦ Slides around coupling flange ♦ Use on one or both coupling sides Shafts can't be rotated? No problem! This bracket allows measurement and alignment to be performed when one or both shafts cannot be rotated. The magnetic sliding bracket is placed upon the back of the coupling or front corner of the uncoupled shaft and slid around from one measurement position to the next. Suitable for shaft/coupling diameters from approx. 80 mm However, bear in mind that good alignment results do depend upon a high-quality surface finish of shafts/couplings...

Magnetic bolt hole bracket ALI 2.106set Perfect for mounting on extremely large couplings ♦ No radial clearance required! ♦ Fits onto any ferromagnetic surface ♦ Extremely rigid, but simple to adjust This bracket can replace the compact chain-type bracket for large couplings having correspond- ingly large bolt holes. Especially handy when radial clearance around the coupling rim is lim- ited, this bracket allows the laser beam to be directed through a coupling bolt hole with the emitter and receiver mounted below the rim. Weight, complete with case 1.7 kg / 3 lb. 12 oz. Individually, without...

Extra-thin bracket Perfect for extremely narrow mounting space ♦ Mounts in only 8 mm / 5/16" space ♦ Slip-nut design mounts quickly Only 8 mm (5/16") thick, this bracket offers an ideal solution to those occasional tight squeezes between coupling and machine housing. The case includes one complete set for both sides of the shaft or coupling, including various threaded rods and quick-mounting slip nuts. For shafts of Small extra-thin bracket ALI 2.109Lset Compact version of above bracket, for shafts of Weight, complete with case Weight, complete with case For detailed information, please consult...