PREMIUM-V
5Pages

PREMIUM-V-** RFID card reader PREMIUM-V** RFID card reader Special design for vehicle mounting The PREMIUM-V-** type is a contactless reader device in the frequency range of 125 kHz or 13,56 MHz. This reader will support either 125 kHz EM4x02 transponders and compatibles or 13.56 MHz Mifare® transponders and output the serial number code in any of many user selectable formats. Due to the fully potted housing, the reader can be installed in all kinds of harsh environments.. An integrated DIP-switch allows easy selection of 1 of 13 possible output formats. A three-colour LED indication and audible tone enhance user feedback. Both beeper and LED’s can be controlled by the host system. The specially designed version Vehicle reader has some extra features added to facilitate installation in a vehicle. Specifications :     Power supply : Power consumption : Transmitting Radio Frequency : o PREMIUM-V-EM : o PREMIUM-V-MF : Supported transponders : o PREMIUM-V-EM : o PREMIUM-V-MF : 125 kHz EM4x02 or compatibles Mifare® Classic 1k/4k, Ultralight, DESFire, PLUS S, PLUS X Contactless interface as per specification: ISO/IEC 14443 Type A NFC Passive mode (ISO 18092/NFC passive mode, initiator, selected tag types only e.g. NTAG203, NTAG213) ISO card with 50mm coil : 50 mm ISO card with 50mm coil : 30 mm 3 LEDs (Greed/Red/Yellow) + Buzzer Buzzer emits a 60ms beep at 4 kHz when a transponder is read. In addition buzzer operates while BUZZER input is pulled low Possibility to connect exterbal buzzer DIP-switch selectable : - Wiegand (58-bit, 42-bit, 34-bit and 26-bit) - Clock & Data ( 13, 10, 9 or 8 characters ) - RS232 (9600, 4800 or 2400 Bd) (EIA level) - TTL (9600, 4800 or 2400 Bd) Single transmission 10-wire cable ( 1 m length ) 90g -20°C ~ +60°C Mullion or wall mount ( Extra mounting plate is supplied with each reader ) 89 x 45 x 16 mm ( dimensions mounting plate : 89 x 45 x 7 mm ) External devices : Data Output format : Typ. read range (@ 12V): Typ. read range (@ 5.0V): Indications : Transmission : Connections : Weight : Operating Temperature : Mounting : Dimensions : ProxTech International bvba Zakstraat 104, 9112 Sinaai ( Belgium ) Info @ proxtech.com

PREMIUM-V-** RFID card reader  Special features for vehicle mounting :  Mutiple read data comparison before output : Data is read 3 times from the tag and compared for identical data output. Only when data is identical 3 times in a row, data is outputted, thus preventing data output from captured noise Data checksum verification to ensure read data is received correctly Possibility to connect external LED and buzzer for user feedback in loud environments Possibility to enable/disable card reading by host controller Physical dimensions and mounting details : Centred cable exit hole All...

PREM1UM-V ** RFID card reader Note : LED and BUZZER inputs are active low. The input is internally pulled high and may be pulled low by an open collector transistor or driven low by the output of a 5 V CMOS or TTL gate.

PREM1UM-V ** RFID card reader Output mode selection: The 6-way switch is used to select the output format and LED mode. The required setting is selected from the following tables: Output mode table Note : In LED Mode 2, both RED and GREEN leds are controlled by the GRN-LED input. When the GRN-LED input is floating or pulled high, the RED led is on and the GREEN led is off. When the GRN-LED input is pulled low (connected to 0V) the GREEN led is on and the RED led is off. The YELLOW led is always off. Under the front cover is a variable capacitor, which may need to be adjusted to re-tune the...

PREMIUM-V-** RFID card reader Power Connections : The reader has an internal low dropout 5V regulator and so for maximum performance the input voltage must be smooth DC between 5.5V and 13.6V. The reading distance is unchanged for input voltages between 5.5V and 13.6V. For input voltages below 5.5V the read range drops off slightly as given in the specifications earlier. If 5V is supplied to the reader this should be noise-free to achieve maximum possible read ranges. Declaration of Conformity : ProxTech International bvba hereby confirms that the product PREMIUM-V-** is in accordance with...