PL962
2Pages

PL962 stand-alone access control PL962 stand-alone access control system The PL962 system consists of a controller with relays to operate a single door or two independent doors. The controller supports two remote card readers or Wiegand devices which can be mounted up to 50 meters from the controller. The card readers are fully potted and suitable for mounting outdoors. Tampering with these readers will not compromise the systems security. Programming the system is very simple and requires a Master Tag to put the unit into programming mode and then to follow a simple procedure to add or delete cards. A jumper setting allows tags to be added automatically to both readers or to allow each reader to have its own set of tags. The door relay can be configured to operate in timed or toggle mode. Transactions are stored in the controller’s non-volatile memory with a date & time stamp. The simple data logging software provided with the system allows a PC to set the controller’s date & time settings and to download the transactions. Connection to the controller is via USB . Simple and quick programming using a Master tag The first Tag presented to the system will be stored in the memory as Master Tag. Programming functions: o Add Tags o Delete Tags o Clear Memory o Adjust/Set Relay operating time Lost Tags can be deleted using an optional Tag Simulator in conjunction with the master Tag Controller supports two readers Controller can control 2 independent doors or a single door (jumper setting) Controller holds up to 2000 tags in non-volatile memory Each reader can have its own set of tags or can be set to add tags automatically to both readers. The last 2000 transactions stored with date & time stamp in non-volatile memory (only valid transactions) Simple logging software to download transaction data and set date & time Optional Door Switch will reset door strike relay when the door opens Exit Push Button Simple installation (3 wires from secure reader (125 kHz) to controller) Connections to connect any device with Wiegand 26 bit interface, such as Mifare or Legic readers ProxTech International bvba Zakstraat 104, 9112 Sinaai ( Belgium ) Info @ proxtech.com

PL962 stand-alone access control Unit size (L/W/H) : 125 mm x 100 mm x 38 mm Operation temperature: -20°C to +70°C Operation humidity: 5% - 95% relative humidity (non condensing) Voltage: 10 - 14 VDC Current (typical): o Controller only 15 mA o Controller only - both relays active 75 mA o Controller with 2 readers and both relays active 200 mA Relays (2): Voltage free change over contacts rated: o 5A @ 120VAC and 2.5A @ 240VAC for non-inductive loads o 3A @ 28VDC for inductive loads. Reader connections : 2 readers can be connected to control 1 door (in/out) or 2 individual doors Reader...