*mydirectindustry

Hydrogen S Series

Product catalog summary

Overview
The HOGEN S Series Hydrogen Generation Systems are on-site hydrogen generators housed in integrated, automated, site-ready enclosures. They feature Load Following operation, which automatically adjusts output to match demand.

Specifications

Electrolyte: Proton Exchange Membrane (PEM), caustic-free.
Hydrogen Production Rates:
- S10: 0.265 Nm3/hr, 10 SCF/hr, 4.7 SLPM, 0.57 kg/24hr
- S20: 0.53 Nm3/hr, 20 SCF/hr, 9.4 SLPM, 1.14 kg/24hr
- S40: 1.05 Nm3/hr, 40 SCF/hr, 18.8 SLPM, 2.27 kg/24hr
Delivery Pressure: Nominal 13.8 barg (200 PSIG).
Power Consumption: 6.7 kWh/Nm3, 17.6 kWh/100 ft3.
Purity: 99.9995% with specific impurity limits.
Turndown Range: 0 to 100% net product delivery.

Water Requirements

DI Water Consumption Rates:
- S10: 0.235 L/hr
- S20: 0.47 L/hr
- S40: 0.94 L/hr
Temperature: 5°C to 35°C (41°F to 95°F).
Pressure: 1.5 to 4 barg (21.8 to 58.0 PSIG).
Water Quality: ASTM Type II Deionized Water required, Type I preferred.

Cooling and Electrical Specifications

Cooling: Air-cooled; ambient air 5°C to 40°C (41°F to 104°F).
Max Heat Load:
- S10: 1.1 kW
- S20: 2.2 kW
- S40: 4.3 kW
Electrical: 205 to 240 VAC, single phase, 50 or 60 Hz.

Interface Connections
Includes H2 product port, H2/H2O vent port, DI water port, and drain port. Consult the installation manual for details.

Control Systems
Features include fully automated start/stop, emergency stop, H2 leak detection, automatic fault detection, and system depressurization.

Enclosure Characteristics

Dimensions: 31” x 38” x 42” (Product) / 38” x 45” x 52” (Shipping).
Weight: 475 lbs (Product) / 650 lbs (Shipping).
Rating: IP22.

Environmental Considerations
Indoor installation, non-hazardous environment, with specific temperature and altitude ranges.

Safety and Regulatory Conformity
Complies with NFPA 69, EN 1127-1, and other standards. Approved by cTUVus, CE, and NYFD.

Options
Customizable options available to meet specific operational requirements. Contact Proton Onsite for more information.

Catalog excerpts

Technical Specifications HOGEN® S Series Hydrogen Generation Systems DESCRIPTION On-site hydrogen generator in an integrated, automated, site-ready enclosure. Load Following operation automatically adjusts output to match demand. ELECTROLYTE Proton Exchange Membrane (PEM) - caustic-free HYDROGEN PRODUCTION Net Production Rate: Nm3/hr @ 0°C, 1 bar SCF/hr @ 70°F, 1 atm SLPM @ 70°F, 1 atm kg per 24 hours Delivery Pressure - Nominal Power Consumed per Volume of H2 Gas Produced Purity (Concentration of Impurities) 99.9995% (Water Vapor < 5 PPM, -65°C (-85°F) Dewpoint, N2 < 2 PPM, O2 < 1 PPM, All Other Undetectable) Turndown Range DI WATER REQUIREMENT Rate at Max Consumption Rate Temperature Pressure Input Water Quality 5°C to 35°C (41°F to 95°F) 1.5 to 4 barg (21.8 to 58.0 PSIG) ASTM Type II Deionized Water required, < 1 micro Siemen/cm (>1 megOhm-cm) ASTM Type I Deionized Water preferred, < 0.1 micro Siemen/cm (> 10 megOhm-cm) www.protononsite.com | T 203.949.8697 | F 203.949.8016 | Proton OnSite 10 Technology Drive Wallingford, CT 06492 | [email protected]

Open the catalog to page 1

HEAT LOAD AND COOLANT REQUIREMENT Cooling Max. Heat Load from System ELECTRICAL SPECIFICATIONS Recommended Breaker Rating Electrical Specification INTERFACE CONNECTIONS *Consult Installation Manual for details* H2 Product Port 1/4” CPI™ compression tube fitting, SS 1/2” CPI™ compression tube fitting, SS 1/4” tube push-to-lock, polypropylene Calibration-Gas Port Coolant Supply Port Coolant Return Port Drain Port 1/4” tube push-to-lock polypropylene Connect to on-board circuit breaker CONTROL SYSTEMS Standard Features Fully automated, push button start/stop. E-stop. On-board H2 Leak detection....

Open the catalog to page 2

Hydrogen S Series

Hydrogen S Series

Catalog excerpts

All Proton Energy Systems catalogs and technical brochures

Archived catalogs