*mydirectindustry

Hydrogen H Series

Product catalog summary

Description: The HOGEN H Series Hydrogen Generation Systems are on-site hydrogen generators housed in integrated, automated, site-ready enclosures. They feature Load Following operation, which automatically adjusts output to match demand.

Electrolyte: Utilizes a Proton Exchange Membrane (PEM) that is caustic-free.

Hydrogen Production: The systems produce hydrogen at varying rates: 2, 4, and 6 Nm3/hr, with corresponding outputs in SCF/hr, SLPM, and kg per 24 hours. Delivery pressure is nominally 15 barg, with an option for 30 barg. Purity is 99.9995% with minimal impurities.

DI Water Requirement: The systems require ASTM Type II or Type I deionized water, with specific consumption rates and temperature/pressure conditions.

Heat Load and Coolant Requirement: The systems are liquid-cooled, with specific heat load requirements depending on the model.

Electrical Specifications: Recommended breaker ratings vary by model, with electrical specifications of 380 to 480 VAC, 3 phase, 50 or 60 Hz.

Interface Connections: Various ports are provided for H2 product, venting, DI water, calibration gas, coolant supply and return, and drainage.

Control Systems: Features include fully automated operation, emergency stop, on-board H2 leak detection, and remote alarm and shutdown capabilities.

Enclosure Characteristics: Dimensions and weight vary by model, with IP66 and IP43 ratings for electronics and fluids compartments, respectively.

Environmental Characteristics: Suitable for indoor, non-hazardous environments with specific temperature and altitude ranges.

Safety and Regulatory Conformity: Complies with various safety standards and approvals, including cTUVus and CE.

Options: Customization options are available to meet specific operational requirements.

Catalog excerpts

Technical Specifications HOGEN® H Series Hydrogen Generation Systems DESCRIPTION On-site hydrogen generator in an integrated, automated, site-ready enclosure. Load Following operation automatically adjusts output to match demand. ELECTROLYTE Proton Exchange Membrane (PEM) - caustic-free HYDROGEN PRODUCTION Net Production Rate: Nm3/hr @ 0°C, 1 bar SCF/hr @ 70°F, 1 atm SLPM @ 70°F, 1 atm kg per 24 hours Delivery Pressure - Nominal Power Consumed per Volume of H2 Gas Produced Purity (Concentration of Impurities) 99.9995% (Water Vapor < 5 PPM, -65°C (-85°F) Dewpoint, N2 < 2ppm O2 < 1 PPM, All Others Undetectable) Turndown Range Upgradeability 0 to 100% net product delivery (Automatic) Field upgradeable to a maximum of 6 Nm3/hr (228 SCF/hr) DI WATER REQUIREMENT Rate at Max Consumption Rate Temperature Pressure Input Water Quality 5°C to 50°C (41°F to 122°F) 1.5 to 4 barg (21.8 to 58.0 PSIG) ASTM Type II Deionized Water required, < 1 micro Siemen/cm (>1 megOhm-cm) ASTM Type I Deionized Water preferred, < 0.1 micro Siemen/cm (>10 megOhm-cm) www.protononsite.com | T 203.949.8697 | F 203.949.8016 | Proton OnSite 10 Technology Drive Wallingford, CT 06492 | [email protected]

Open the catalog to page 1

Proton Onsite offers a wide range of options to tailor your HOGEN hydrogen generation system to meet your specific operational requirements. Please contact your local representative to discuss the current list of options available to best fit your needs. Consult Proton Onsite Applications Department for proper installation guidelines. Specifications subject to change. ■ I ^^^1 ^^^J I © Proton Energy Systems, Inc. All Rights Reserved. ^ ^ z<r«^ A I™ _ • Proton, Proton OnSite, Proton Energy Systems and HOGEN are [ £ C^L. J y%* DN SITE trademarks of Proton Energy Systems, Inc. d/b/a Proton OnSite...

Open the catalog to page 2

Hydrogen H Series

Hydrogen H Series

Catalog excerpts

All Proton Energy Systems catalogs and technical brochures

Archived catalogs