Everyday PLA - 5 Pages

Add to MyDirectIndustry favorites
Everyday PLA

Catalog excerpts

MATERIAL SAFETY DATA SHEET    DOC VERSION: 1PROTO-PASTA EVERYDAY PLA    PRINT DATE: 03/25/2016REV DATE:SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: SYNONYMS: PRODUCT CODES: Proto-pasta Everyday PLA Proto-pasta Everyday PLA PLAXXXX-XXX RECOMMENDED USE:    For use in 3D printers at recommended temperatures MANUFACTURER:    Proto Plant ADDRESS:    5601 East 18Th Street #102 OTHER CALLS: 503-877-5268 HOMEPAGE:    www.protoplant.com CONTACTS:    Dustin Cram - Chief Engineer EMERGENCY OVERVIEW: This is a polymeric compound. All ingredients are encapsulated by the polymer and present no likelihood of exposure under normal conditions of processing and handling. GHS-US CLASSIFICATION This product is not classified under GHS SIGNAL WORD:    NONE HAZARDS THAT DO NOT RESULT IN CLASSIFICATION EYES:    Solid/dust may cause irritation due to mechanical action. Dust will not be generated under normal use conditions. SKIN:    Filament is not likely to cause irritation. Contact with molten material may cause thermal burns. BURNS:    Molten material will cause thermal burns, avoid contact. INHALATION:    Processing fumes may cause irritation to the respiratory tract, use in well ventilated areas only. CHRONIC HEALTH HAZARDS: None known for this compound.

 Open the catalog to page 1

EYES: First Aid not likely required. Flush with water. Consult physician if symptoms persist. SKIN: Wash with soap and water. For thermal burns, immediately flush with cold water. Do not attempt to remove polymer from skin. Obtain medical attention. INGESTION: Obtain immediate medical attention. For a poison emergency in the U.S. call 1-800-222-1222. INHALATION: Leave exposed area and seek fresh air. If irritation persists, seek medical attention. NOTES TO PHYSICIANS OR FIRST AID PROVIDERS: Treat symptomatically. FLAMMABILITY CLASS: 1 EXTINGUISHING MEDIA: Foam. Water. Carbon Dioxide (CO2)....

 Open the catalog to page 2

MATERIAL SAFETY DATA SHEET DOC VERSION: 1 PRINT DATE: 03/25/2016 REV DATE: METHODS FOR CLEANING UP: Cut filament into short pieces to prevent tripping. Dispose of in suitable containers. SECTION 7: HANDLING AND STORAGE PRECAUTIONS: Proper purging and shut down procedures should be followed to avoid overheating of this compound. Use only at recommended printing temperatures. Product as shipped is not a combustible dust. HANDLING AND STORAGE: Store in a cool, dry place. Product as shipped is not a combustible dust. Mechanical handling can cause the formation of dusts. To reduce the risk for...

 Open the catalog to page 3

REV DATE: FLAMMABILITY: Combustible if heated UPPER/LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: Not Determined VAPOR PRESSURE: Not Determined VAPOR DENSITY: Not Determined DENSITY: 1.24 g/cc WATER SOLUBILITY: Insoluble SOLUBILITY IN OTHER SOLVENTS: Not determined PARTITION COEFFICIENT: N-OCTANOL/WATER: Not Determined AUTO-IGNITION TEMPERATURE: 300C-400C DECOMPOSITION TEMPERATURE: 482F (250C) VISCOSITY: Not applicable SECTION 10: STABILITY AND REACTIVITY REACTIVITY: Stable when stored as recommended CONDITIONS TO AVOID: Temperatures above 446F (230 °C). MATERIALS TO AVOID: Oxidizing agents....

 Open the catalog to page 4

MATERIAL SAFETY DATA SHEET DOC VERSION: 1 PRINT DATE: 03/25/2016 REV DATE: PROTO-PASTA EVERYDAY PLA REPRODUCTIVE TOXICITY: Not Determined STOT-SINGLE EXPOSURE: Not Determined STOT-SINGLE EXPOSURE: Not Determined ASPITIATION HAZARD: None Known SECTION 12: ECOLOGICAL INFORMATION ECOTOXICITY EFFECTS: Not Determined DEGRADABILITY AND PERSISTENCE: Not Determined BIOACCUMULATIVE POTENTIAL: Not Determined MOBILITY IN SOIL: Not Determined SECTION 13: DISPOSAL CONSIDERATIONS WASTE DISPOSAL METHOD: In accordance with local and national regulations. Do not contaminate ponds, waterways or ditches with...

 Open the catalog to page 5

All Proto-Pasta catalogs and technical brochures