Composite PLA - Rustable Magnetic Iron - 6 Pages

Add to MyDirectIndustry favorites
Composite PLA - Rustable Magnetic Iron

Catalog excerpts

SAFETY DATA SHEET    DOC VERSION: 1PROTO-PASTA MAGNETIC IRON PLA    PRINT DATE: 04/25/2016REV DATE: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME:    Proto-pasta    Magnetic Iron PLA SYNONYMS:    Proto-pasta    FEPLA RECOMMENDED USE:    For use in 3D printers at recommended temperatures MANUFACTURER: ADDRESS: EMERGENCY PHONE: OTHER CALLS: HOMEPAGE: Proto Plant 5601 East 18Th Street #102 Vancouver, WA 98661 503-877-5268 503-877-5268 www.protoplant.com Dustin Cram - Chief Engineer SECTION 2: HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: This is a polymeric compound. All ingredients are encapsulated by the polymer and present no likelihood of exposure under normal conditions of processing and handling. Dust may be generated during polishing, sanding, or machining. Appropriate PPE must be worn for these activities.. GHS-US CLASSIFICATION:    NONE SIGNAL WORD:    NONE HAZARD STATEMENT:    NONE LABEL ELEMENTS:    NONE PRECAUTIONARY STATEMENT:    NONE HAZARDS THAT DO NOT RESULT IN CLASSIFICATION EYES:    Solid/dust may cause irritation due to mechanical action. Dust will not be generated under normal use conditions. SKIN:    Filament is not likely to cause irritation. Contact with molten material may cause thermal burns. BURNS:    Molten material will cause thermal burns, avoid contact. INHALATION:    Processing fumes may cause irritation to the respiratory tract, use in well ventilated areas only. CHRONIC HEALTH HAZARDS:    None known for this compound.

 Open the catalog to page 1

DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: SAFETY DATA SHEETPROTO-PASTA MAGNETIC IRON PLASECTION 3: COMPOSITION/INFORMATION ON INGREDIENTSINGREDIENTS_CAS NO._% WT Polylactide resin    9051-89-2    55 EYES: First Aid not likely required. Flush with water. Consult physician if symptoms persist. SKIN: Wash with soap and water. For thermal burns, immediately flush with cold water. Do not attempt to remove polymer from skin. Obtain medical attention. INGESTION: Obtain immediate medical attention. For a poison emergency in the U.S. call 1-800-222-1222. INHALATION: Leave exposed area and seek...

 Open the catalog to page 2

ENVIRONMENTAL PRECAUTIONS: Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. METHODS FOR CLEANING UP: Cut filament into short pieces to prevent tripping. Dispose of in suitable containers. PRECAUTIONS: Proper purging and shut down procedures should be followed to avoid overheating of this compound. Use only at recommended printing temperatures. Product as shipped is not a combustible dust. Mechanical abrasion such as cutting, sanding, and grinding can release metal powder which may cause skin, eye, and respiratory irritation....

 Open the catalog to page 3

REV DATE: SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: Dark gray, textured/rough, thin strand ODOR: Light sweet odor during processing, no odor at room temperature ODOR THRESHOLD: Not determined pH: Not Applicable MELTING RANGE: 150C-180C BOILING POINT/RANGE: Not applicable FLASH POINT: Not Determined EVAPORATION RATE: Not determined FLAMMABILITY: Combustible if heated UPPER/LOWER FLAMMABILITY OR EXPLOSIVE LIMITS: Not Determined VAPOR PRESSURE: Not Determined VAPOR DENSITY: Not Determined DENSITY: 2 g/cc WATER SOLUBILITY: Insoluble SOLUBILITY IN OTHER SOLVENTS: Not...

 Open the catalog to page 4

SAFETY DATA SHEET DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: PROTO-PASTA MAGNETIC IRON PLA Polymerization: Not applicable SECTION 11: TOXICOLOGICAL INFORMATION PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion. ACCUTE TOXICITY: None Known SKIN CORROSION/IRRITATION: Contact with dust/fumes may cause irritation SERIONS EYE DAMAGE/IRRITATION: Contact with dust/fumes may cause irritation RESPIRATORTY OR SKIN SENSITIZATION: None Known GERM CELL MUTAGENICITY: Not Determined CARCINOGENICITY: Not Determined REPRODUCTIVE TOXICITY: Not Determined STOT-SINGLE...

 Open the catalog to page 5

SAFETY DATA SHEET DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: PROTO-PASTA MAGNETIC IRON PLA SECTION 15: REGULATORY INFORMATION This product contains the following toxic chemicals subject to the reporting requirements of section 313 of the Emergency Planning and Community Right To Know Act of 1986 and of 40 CFR 372: NONE SECTION 16: OTHER INFORMATION DISCLAIMER: ProtoPlant believes that the information contained herein is accurate as of the date hereof. HOWEVER, NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY...

 Open the catalog to page 6

All Proto-Pasta catalogs and technical brochures

  1. Everyday PLA

    5 Pages