Composite PLA - Polishable Stainless Steel - 7 Pages

Add to MyDirectIndustry favorites
Composite PLA - Polishable Stainless Steel

Catalog excerpts

SAFETY DATA SHEET    DOC VERSION: 1PROTO-PASTA STAINLESS STEEL PLA    PRINT DATE: 04/25/2016REV DATE: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME:    Proto-pasta Stainless    Steel PLA SYNONYMS:    Proto-pasta SSPLA RECOMMENDED USE:    For use in 3D printers at recommended temperatures MANUFACTURER: ADDRESS: EMERGENCY PHONE: OTHER CALLS: HOMEPAGE: Proto Plant 5601 East 18Th Street #102 Vancouver, WA 98661 503-877-5268 503-877-5268 Dustin Cram - Chief Engineer SECTION 2: HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: This is a polymeric compound. All ingredients are encapsulated by the polymer and present no likelihood of exposure under normal conditions of processing and handling. Dust may be generated during polishing, sanding, or machining. Appropriate PPE must be worn for these activities and the release of hazardous dust is possible. GHS-US CLASSIFICATION SKIN SENSITIZATION:    NONE CARCINOGENICITY    NONE SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE):    NONE COMBUSTIBLE DUST    NONE SIGNAL WORD:    NONE HAZARD STATEMENT:    NONE LABEL ELEMENTS:    NONE DANGER May cause an allergic skin reaction May cause cancer Causes damage to organs through prolonged or repeated exposure May form combustible dust concentrations in air

 Open the catalog to page 1

SAFETY DATA SHEET PROTO-PASTA STAINLESS STEEL PLA DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: PRECAUTIONARY STATEMENT: AS SHIPPED: NONE IF GROUND/POLISHED/MACHINED Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Contaminated work clothing should not be allowed out of the workplace Wear protective gloves Do not breathe dust/fume/gas/mist/vapors/spray Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when handling dust generated from this product Precautionary Statements -...

 Open the catalog to page 2

SAFETY DATA SHEET DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: PROTO-PASTA STAINLESS STEEL PLA EYES: First Aid not likely required. Flush with water. Consult physician if symptoms persist. SKIN: Wash with soap and water. For thermal burns, immediately flush with cold water. Do not attempt to remove polymer from skin. Obtain medical attention. INGESTION: Obtain immediate medical attention. For a poison emergency in the U.S. call 1-800-222-1222. INHALATION: Leave exposed area and seek fresh air. If irritation persists, seek medical attention. When generating dust or processing use...

 Open the catalog to page 3

SAFETY DATA SHEET    DOC VERSION: 1PROTO-PASTA STAINLESS STEEL PLA    PRINT DATE: 04/25/2016REV DATE: PRECAUTIONS: Proper purging and shut down procedures should be followed to avoid overheating of this compound. Use only at recommended printing temperatures. Product as shipped is not a combustible dust. Mechanical abrasion such as cutting, sanding, and grinding can release metal powder which may cause skin, eye, and respiratory irritation. Use appropriate exposure controls (Section 8) HANDLING AND STORAGE: Store in a cool, dry place. Product as shipped is not a combustible dust. Mechanical...

 Open the catalog to page 4

REV DATE: A NIOSH approved respirator is recommended for protection against processing fumes, or from dust generated from grinding, sanding, or sawing operations. EYE PROTECTION: Safety glasses with side shields are recommended. SKIN PROTECTION: Impervious clothing. For prolonged handling, canvas or cotton gloves are recommended. WORK HYGIENIC PRACTICES: Wash hands and dry hands thoroughly before and after handling product. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES_ APPEARANCE: light gray, textured/rough, thin strand ODOR: Light sweet odor during processing, no odor at room...

 Open the catalog to page 5

DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: SAFETY DATA SHEET PROTO-PASTA STAINLESS STEEL PLA SECTION 10: STABILITY AND REACTIVITY_ REACTIVITY: Stable when stored as recommended CONDITIONS TO AVOID: Temperatures above 446F (230 °C). MATERIALS TO AVOID: Oxidizing agents. Strong bases. HAZARDOUS DECOMPOSITION PRODUCTS: Burning produces obnoxious and toxic fumes. Aldehydes. Carbon monoxide (CO). carbon dioxide (CO2). Polymerization: Not applicable SECTION 11: TOXICOLOGICAL INFORMATION_ PRINCIPLE ROUTES OF EXPOSURE: Eye contact, Skin contact, Inhalation, Ingestion. ACCUTE TOXICITY: None...

 Open the catalog to page 6

SAFETY DATA SHEET DOC VERSION: 1 PRINT DATE: 04/25/2016 REV DATE: PROTO-PASTA STAINLESS STEEL PLA WASTE DISPOSAL METHOD: In accordance with local and national regulations. Do not contaminate ponds, waterways or ditches with chemical or used container. For recycling, contact local waste disposal centers. SECTION 14: TRANSPORT INFORMATION SECTION 14 NOTES: Not regulated under the US Department of Transportation. SECTION 15: REGULATORY INFORMATION This product contains the following toxic chemicals subject to the reporting requirements of section 313 of the Emergency Planning and Community...

 Open the catalog to page 7

All Proto-Pasta catalogs and technical brochures

  1. Everyday PLA

    5 Pages