Composite PLA - Electrically Conductive Graphite - 4 Pages

Add to MyDirectIndustry favorites
Composite PLA - Electrically Conductive Graphite

Catalog excerpts

MATERIAL SAFETY DATA SHEET    DOC VERSION: 1PROTO-PASTA CONDUCTIVE PLA    PRINT DATE: 1/15/2015 REV DATE: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME:    Proto-pasta Conductive PLA SYNONYMS:    Proto-pasta CCPLA PRODUCT CODES: MANUFACTURER:    Proto Plant ADDRESS:    5601 East 18Th Street #102 HOMEPAGE: / Dustin Cram - Chief Engineer Sara Shepherd - MSDS Coordinator SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTSCAS NO.% WTSARA 313 REPORTABLE Polylactide Resin    9051-89-2    None Black Conductive Compound    1333-86-4    None SECTION 2 NOTES: All components of this product are either listed on or exempt from listing on the TSCA Inventory. All ingredients in quantities > 1.0% (0.1% for carcinogens) that are potentially hazardous per OSHA definitions. SECTION 3: HAZARDS IDENTIFICATION COMMENTS: Hazard identification shown in Section 3 is based upon general information as to normal uses and conditions. Where special or unusual use or conditions exist, it is suggested that the expert assistance of an industrial hygienist or other qualified professional be sought. CARCINOGENITY: Carbon black has been evaluated by IARC as a possible Carcinogenic to Human (Group 2B). However, the carbon black contained in this product is completely encapsulated in thermoplastics and as such, should not present a health hazard. Carbon black has not been listed as a carcinogen by the National Toxicology Program (NTP) or Occupational Safety & Health (OSHA). POTENTIAL HEALTH EFFECTS EYES:    Solid/dust may cause irritation due to mechanical action. Processing fumes may cause irritation. SKIN:    Excessive handling may result in slight skin irritation caused by fiber abrasion. Contact with molten material may cause thermal burns. Processing fumes may cause irritation. INGESTION: Not a probable route of exposure. Obtain immediate medical attention.    CONTINUED

 Open the catalog to page 1

MATERIAL SAFETY DATA SHEET PROTO-PASTA CONDUCTIVE PLA INHALATION: Dust and fume are irritating to respiratory system. May cause sensitization by inhalation. Use in a well ventilated area or with an approved respirator if exposed to dust. CHRONIC HEALTH HAZARDS: None known for this compound. SECTION 3 NOTES: Low hazard for usual industrial or commercial handling. SECTION 4: FIRST AID MEASURES EYES: Flush with water. Consult physician if symptoms persist. SKIN: Wash with soap and water. For thermal burns, immediately flush with cold water. Do not attempt to remove polymer from skin. Obtain...

 Open the catalog to page 2

MATERIAL SAFETY DATA SHEET PROTO-PASTA CONDUCTIVE PLA SECTION 7: HANDLING AND STORAGE HANDLING AND STORAGE: Store in a cool, dry place. Product as shipped is not a combustible dust. Mechanical handling can cause the formation of dusts. To reduce the risk for dust explosion do not permit dust to accumulate. OTHER PRECAUTIONS: Proper purging and shut down procedures should be followed to avoid overheating of this compound. Product as shipped is not a combustible dust. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: Ensure adequate ventilation on workstation. Avoid dust...

 Open the catalog to page 3

MATERIAL SAFETY DATA SHEET PROTO-PASTA CONDUCTIVE PLA SECTION 10: STABILITY AND REACTIVITY STABLE X STABILITY: Stable under recommended storage conditions CONDITIONS TO AVOID: Temperatures above 446F (230 °C). MATERIALS TO AVOID: Oxidizing agents. Strong bases. Hazardous decomposition products: Carbon Dioxide, Carbon Monoxide, Monomer fragments. Polymerization: Not applicable SECTION 11: TOXICOLOGICAL INFORMATION TOXICOLOGICAL INFORMATION: On product: No data available CARCINOGENITY: Carbon black has been evaluated by IARC as a possible Carcinogenic to Human (Group 2B). However, the carbon...

 Open the catalog to page 4

All Proto-Pasta catalogs and technical brochures

  1. Everyday PLA

    5 Pages