Surveymaster™ Protimeter Dual-Function Moisture Meter The Surveymaster™ can help building professionals—such as contractors, surveyors, home builders and architects—assess building moisture levels during new build and refurbishing activities. Excessive moisture in buildings can lead to decay and deterioration of components and decorative finishes. Professionals involved with the identification, management and remedy of moisture need tools that help them to: • Identify the extent of the moisture penetration • Diagnose the cause of the problem • Monitor change in the moisture level Protimeter moisture meters and hygrometers satisfy these requirements comprehensively. The Surveymaster™ is the preferred industry choice for surveying and investigating moisture in buildings. Amphenol Advanced Sensors Two Operational Modes This reliable moisture meter has two modes of operation—search and measure. These functions can help the user to distinguish sub-surface from surface moisture, essential information when trying to establish the extent and cause of a da

Search Mode Non-Invasive Measure Mode Pin-Type The search mode is used to assess the moisture level beneath the surface of solid walls and floors independently of surface conditions. The nominal depth of the measurement is 3/4 inch (19 mm); this depends on the density and other characteristics of the material being measured. When held against the surface, as shown below, the instrument transmits a signal into the material. The relative moisture level is shown on the digital display and its moisture condition is shown on the accompanying scale of color-coded lights. This measurement presentation...

Reference mode (Patent Pending) In both Pin and Search mode, Protimeter’s patent pending Reference Mode can be used. Reference mode can be useful when trying to establish what materials are above or below a point of reference or dry standard. Measure the dry standard or baseline material until the meter’s reading is stable then press for seconds. This will store the reading until the mode changes of the meter turns off. Now all readings taken after will be displayed as normal, but below you will see a second reading that shows you if the material is measured above or below the original reading....

Technical Specifications Standard Supply Instrument, 5 in (127 mm) deep wall probes, moisture probe, calcheck, 2 spare pins, pouch and instructions Weight, Including Batteries 8 oz. (225 gm) User adjustable features: • Auto shut off 1-6 mins. • Hold feature • Backlight on/off. • Audible on/off. • Dry, At Risk and Wet Indicator on/off. Amphenol Advanced Sensors www.protimeter.com www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks...