Complete Protimeter Moisture Measurement System The all new MMS2 represents the latest Protimeter technology in one intuitive, robust and fully functional design. If you’re surveying buildings, inspecting a home, drying a building after a flood, or testing concrete moisture for a flooring application, the MMS2 is the solution for you. • Pin moisture measurement • Non-invasive moisture measurement • Non-contact IR temperature measurement • Fast responding relative humidity and temperature measurement Features • Intuitive user interface with color screen • Data logging • Full building moisture diagnostics on easy-touse instrument • Firmware upgradable • Fast responding hygrometer speeds up building surveys • No need to plug in multiple accessories Amphenol Advanced Sensors • Psychrometric calculations • Surface non-contact temperature measure

Four-In-One Moisture Measurement System Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials. Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures. • • • Use built-in pin or plug in the heavy duty moisture probe for measuring in hard-to-reach areas Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures Use accessories such as hammer probes to measure at depth Search (non-invasive mode)...

Data Storage Functions When concise and accurate environmental readings need to be reported, the MMS Plus gets the job done. The ability to record readings instantly at the push of a button, and to continuously log when left on site, makes this instrument ideal for many applications including: • • • • • Building survey Fire and flood restoration Concrete floor moisture measurement Indoor air quality Environmental health Tair Tdew grains/lb Readings from multiple Hygrosticks can be taken and recorded with ease. Humidity readings can be taken with the use of humidity sleeves or humidity box. Hygrosticks,...

MMS2 Specifications Gross Weight 10 oz (283 gms) MMS2 Hard Carry Case Kit Maximum Needle Depth 0.4 in (10 mm) Infrared Surface Temperature Range IR Based – With 12:1 (D:S) Ratio Range -4°F to 176°F (-20°C to 80°C) Accuracy ±3.6°F (±2°C) Warranty 24 months on mechanical or manufacturing defects. Does not include wearing part or accessories Quikstick and Quikstick ST Data (Nominal) Moisture Measurement Range Pin (% WME) 8% to 99, readings over 30% are relative Non-invasive (RF) up to 3/4 in (19 mm) deep 60 to 1000 (relative) Plug in Temperature Probe Surface Temperature Probe - BLD5805 Data Storage...