Website:
PROTEM
Group: ttng-hd
Catalog excerpts
FBB1-3 Elbow Bench Beveling Machine Standard Capacity: 1“ - 3“ (33.4mm - 88.9mm) This mobile machine has been designed for the machining of elbows from 1 to 3 inches. It can perform beveling, facing and counterboring operations simultaneously. Based on the standard SE90NG design, the machining spindle is equipped with a standard plate with 4 tool holders in which the insert holders can be adjusted according to the requested angles. The drive power can be pneumatic or electric. The height adjustment allows a very precise setting of the elbow and spindle axes. (+/- 0.078", 2mm) The other part of the machine is dedicated to the clamping of the elbows. The principle of a cross table is used for the axes adjustments (+/- 0.19’’, 5mm). The clamping is made manually. For each elbow, a small table equipped with a clamping system comes into position automatically on the cross table. This small table orientates itself according to the face of the elbows. (90° rotation). Depending on the elbows Ø, a frame system with V pods clamps the elbows. Technical Features: Fittings beveling bench for Ø 1" - 3" (33.4mm - 88.9mm) with pneumatic drive Fittings beveling bench for Ø 1" - 3" (33.4mm - 88.9mm) in electric 1500W - 220V Specific shapes & angles Facing 90°, bevel 30°, 37°30, 45°, counterbore, J-bevel. Other on request Feed stroke Pneumatic drive Electric drive 1" (25.4 mm) Elbow support block for FBB-1-3 machine Pneumatically driven machines have to be used with a lubricating filter. Recommended option: regulation valve. 2" (50.8 mm) Elbow support block for FBB-1-3 machine 2.5" (63.5 mm) Elbow support block for FBB-1-3 machine 3" (76.2 mm) Elbow support block for FBB-1-3 machine Pictures, drawings and technical information are n
Open the catalog to page 1
FBB2-6 Elbow Bench Beveling Machine Standard Capacity: 2.374" - 6.626" (60.3mm - 168.3mm) This mobile machine has been designed for the machining of elbows from 2.374 to 6.626 inches. It can perform beveling, facing and counterboring operations simultaneously. Based on the standard US40 design, the machining spindle is equipped with a standard plate with 4 tool holders in which the insert holders can be adjusted according to the requested angles. The feed stroke of the machine is 1.181" (30 mm) (manually operated). The drive power can be pneumatic or electric. The height adjustment allows a...
Open the catalog to page 2All PROTEM catalogs and technical brochures
-
Welding Preparation - Turkish100 Pages
-
Orbital Cutting Saws12 Pages
-
WATER SOLUBLE PAPER AND TAPE8 Pages
-
Boring Bar1 Pages
-
Serco SBM14 Pages
