Catalogs >
PROSOFT >
PTQ-PDPMV1

PTQ-PDPMV1
3Pages

Catalog excerpts

DATASHEET PROFIBUS DP Master Network Interface Module for Quantum PTQ-PDPMV1 The PROFIBUS DPV1 Master module is a powerful communication interface for Quantum ® processors. Developed under license from , the module incorporates proprietary backplane technology that enables powerful data exchange with processors. The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor. Data transfer from the processor is asynchronous with the I/O data transfer on the PROFIBUS network. Easy to configure and manage Includes ProSoft Configuration Builder software to design, configure and monitor your PROFIBUS network Includes PROFIBUS DPV1 Master FDT (Field Device Tool) communication DTM (PROFIBUS comDTM) software to interface between any compliant FDT software container, an FDT device DTM, and applicable PROFIBUS slave devices Configure PTQ module and PROFIBUS network over Ethernet Industry Recognition Schneider Electric CAPP (Collaborative Automation Partner Program) Approved PROFIBUS Trade Organization (PTO) Approved The module is built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor The firmware is flash-upgradable Adheres to the Unity HEC Hot Standby Functional Specifications. Supports up to six PTQ-PDPMV1 modules per rack (up to four for Hot Standby implementations) Supports extended diagnostic data, alarm indications and confirmations handling, Multicast and Broadcast telegrams (DPV1) Configuration ProSoft Configuration Builder (PCB) provides a PC-based software configuration solution for management of module configuration files, as well as viewing communication and network diagnostics. PCB is not only a powerful solution for new configuration files, but also allows you to import information from previously installed (known working) configurations

Open the catalog to page 1

General Specifications • Single slot - Quantum backplane compatible • The module is recognized as an Options module and has access to PLC memory for data transfer • Configuration data is stored in non-volatile memory in the ProTalk® module • Configuration software for Microsoft Windows XP, 2000 and NT is included with the module • Up to six modules can be placed in a rack • Local rack - The module must be placed in the same rack as the processor • Compatible with all common Quantum programming packages, including Concept (version 2.6 or higher), Unity Pro (version 2.2 or higher), ProWORX...

Open the catalog to page 2

Specification Value Backplane Current Load 1100 mA maximum @ 5 Vdc ± 5% Relative Humidity 5% to 95% (with no condensation) Vibration Sine vibration 4-100 Hz in each of the 3 orthogonal axes Shock 30 g, 11 mSec. in each of the 3 orthogonal axes Dimensions (HxWxD), Approx. 250 x 103.85 x 40.34 mm 9.84 x 4.09 x 1.59 in LED Indicators Module Status Backplane Transfer Status Serial Port Activity LED Serial Activity and Error LED Status Master Status Operations Network Drop Communication Master Token-Hold Master database configuration Debug/Configuration Ports Configuration...

Open the catalog to page 3

PTQ-PDPMV1 3Pages

Catalog excerpts

All PROSOFT catalogs and technical brochures

PTQ-PDPMV1
3Pages