1. Catalogs
  2. Prosense Technology
  3. PC3 Series Gas Detectors Datasheet
video corpo

PC3 Series Gas Detectors Datasheet

PC3 Series Gas Detectors Datasheet

PC3 Series Gas Detectors Datasheet

Product catalog summary
Overview
The PC3 Series Gas Detectors by Prosense Teknoloji Sanayi Limited Sirketi offer a high price-performance ratio, specifically designed for light industry applications. These detectors provide accurate readings using electrochemical and catalytic sensors and are ready to operate with 4-20mA analog output, Modbus RS485 RTU, and relay module integration.

Key Features
  • Automatic Calibration: Calibration is automated via preset values in the detector software.
  • Fail-Safe Technology: Includes Alarm 1 and Alarm 2 relays with default LEL, ppm, VOL levels, and a fault relay output.
  • Robust Housing: Epoxy painted aluminum housing with IP65 protection for harsh environments.
  • Universal Outputs: Compatible with any control panel using 4-20mA Analog, Modbus RS485 RTU, and relay outputs.

Applications
  • Process Industry
  • Chemical Industry
  • Food and Medicine Facilities
  • Gas Distribution Stations
  • Laboratories

Specifications
  • Sensing Type: Electrochemical and Catalytic
  • Response Time: Less than 30 seconds for catalytic, less than 25 seconds for electrochemical
  • Accuracy: ±1%
  • Operating Temperature: -20°C to +50°C
  • Humidity: 5-95% RH non-condensing
  • Input Voltage: 10VDC to 32VDC, nominal 24VDC
  • Power Consumption: Max 2W
  • Ingress Protection: IP65
  • Enclosure: Epoxy painted die-cast aluminum
  • Dimensions and Weight: Varies by model
  • Standards: EN 60079-0, EN 60079-1, EN 60079-18

Gas Detection Capabilities
  • Various gases including LPG, Methane, n-Butane, Propane, Hydrogen, and more, with specific measuring ranges.

Optional Modules
  • P-3R+: 2 Alarms and 1 Fault relay output card (NO/NC adjustable).

Compliance
Prosense gas detectors are tested and calibrated before delivery and should be routinely controlled and calibrated according to EN 60079-29-2 standards.
See more

Catalog excerpts

PC3 Series Gas Detectors Datasheet-1

PC3 Series Gas Detectors Datasheet High Price-Performance Ratio PC3 has a certain higher price-performance ratio considering its substitutes in the market. Well-Suited Solution for Light Indusrty PC3 is specially designed for the light industry as a Category 3 device. Accurate Readings Electrochemical, and Catalytic sensors undoubtedly provide an accurate and sensitive measurement. Ready to Operate 4-20mA Analog is provided onboard to operate properly without any additional setup. Additionally, it can be integrated into other systems with Modbus RS485 RTU and relay module. Automatic Calibration Detector calibration can be done automatically via preset values recorded in detector software once calibration requirements are provided. Fail-Safe Technology Alarming Alarm 1 and Alarm 2 relays are easy to set to default LEL, ppm, VOL levels. The fault relay output properly indicates fault status. Robust and Reliable Housing Epoxy painted aluminum housing and IP65 protection class allow to use in harsh environmental conditions. Universal Outputs 4-20mA Analog, Modbus RS485 RTU, and relay outputs are simple to operate efficiently and they are universally usable in any control panel. Applications • Process Industry • Chemical Industry • Food and Medicine Facilities • Gas Distribution Stations • Laboratories Optional Modules • P-3R+: 2 Alarms and 1 Fault (NO/NC adjustable) relay output card. PROSENSE TEKNOLOJI SANAYI LIMITED SIRKETI Cumhuriyet Mah. Mermer Sok.No:16 Kartal 34876 ISTANBUL/TURKEY T: +90 216 306 77 88 F: +90 216 473 81 29 [email protected] - www.prosen

 Open the catalog to page 1
PC3 Series Gas Detectors Datasheet-2

PC3 Series Gas Detectors Datasheet Specifications Sensing Type PC3-XY24 Electrochemical 4-20mA Analog Modbus RS485 RTU 60sec Output Signals Sensor Warm-Up Response Time Accuracy Operating Temperature Humidity Input Voltage Power Consumption Optional Relay Outputs Cable Entry Ingress Protection Enclosure Sensor Head Dimensions Weight Hazardous Class Standards (Sensor Head) *Sensor dependent <25sec %±1 ‐20°C ~ +50°C 5 ~ 95%RH Non-Condensing Min 10VDC - Max 32VDC - Nominal 24VDC Max.2W 2 Alarms (Selectable), and 1 Fault (All relays are NO/NC adjustable) 1x 1/2"NPT IP65 Epoxy Painted Die‐cast Aluminium...

 Open the catalog to page 2

All Prosense Technology catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.