Small compact size Brass construction suitable for non-corrosive liquids Reliable pressure regulation for flows up to 1 gpm Ideal for use with BB, QB or MM servo valves These regulators are small and compact (only 1-5/8” high) and designed for use in water applications. Brass construction is suitable for non-corrosive liquids. The RG0003 has reliable pressure regulation for flows up to 1 gpm and is capable of controlling pressure to 100psi. Regulator can withstand water temperatures to 200 degrees F (93.3 degrees C). Type Maximum Inlet Pressure Outlet Pressure Operating Temperature Recommended Filtration Flow Capacity Main Ports Gauge Ports Material Non-relieving diaphragm 200 psig (13.79 Bar) 0 – 100 psig (0 – 6.89 Bar) 32° to 158°F (0° to 70°C) 40 micron nominal See graph 1/4 inch NPT 1/8 inch NPT Body – Brass Dome – Brass Internal – Teflon, Brass Elastomers – Nitrile DIMENSIONS 1/8” - 27 NPTF PILOT PORT 2 1 1/8” - 27 NPTF GAUGE PORT BOTH SIDES ORDERING INFORMATION RG Model RG0003 Primary Pressure = 100 psig Secondary Pressure [psig] Flow [gal/min] 1.5 6 [Liters/min] PROPORTION-AIR, INC. BOX 218 MCCORDSVILLE, IN USA 46055 PHONE: (317)335-2602 FAX: (317)335-3853 web site: www.proportionair.com email address: [email protected] BRRG0003 4/28/04 NK