*mydirectindustry

DS

Product catalog summary

Overview: The document provides technical specifications and details for the DS series pressure transducers, which measure pressure of gases or fluids and output an electrical signal. The transducers are available in various models, each with specific features and applications.

Specifications:

Pressure Range: Full Vacuum to 7,000 psig (483 bar).
Electrical: Supply Voltage 15 to 24 VDC, Supply Current 35 to 50 mADC or 4 to 20 mADC depending on the model.
Analog Output: 0 to 10 Vdc or 4 to 20 mA.
Pneumatic: Response Time 100 Microseconds, Repeatability ±0.02% to ±0.25%, Accuracy ±0.2% to ±0.5%.
Operating Temperature: 32°F to 158°F.

Models and Features:

DS Standard: Uses a piezo-resistive semiconductor sensor chip.
DST Stainless Steel: Silicon etched device on a stainless steel diaphragm, no elastomers or o-rings contact the media.
DSW NEMA4: Sealed against fluid spray, housed in a larger canister.
DSL Compact: Miniature anodized aluminum canister, lightweight with high accuracy.

Physical Characteristics:

DSB: Weight 4.8 oz, made of Viton, Aluminum & 360 FC Brass.
DSW: Weight 11.2 oz, similar materials as DSB.
DST: Weight 5.4 oz, made of 316L Stainless Steel & Aluminum.
DSL: Weight 1.6 oz, made of Aluminum & Buna-N.

Applications: DS-series transducers can be used as direct feedback to Electro-Pneumatic Pressure Regulators for high accuracy and repeatability.

Warranty and Certification: Proportion-Air products are warranted for one year against defects in material or workmanship. The company is ISO 9001-2008 Certified.

Contact Information: Proportion-Air, Inc., McCordsville, Indiana, USA. Phone: 317-335-2602, Fax: 317-335-3853, Email: [email protected].

Catalog excerpts

Pressure Flow Force Vacuum Tension Position Torque From Full Vacuum to 7,000 psig (483 bar)

Open the catalog to page 1

DS series pressure transducers accurately measure pressure of gases or fluids. The output is an electrical signal based on the measurement. ELECTRICAL Supply Voltage 15 to 24 VDC Supply Current 35 to 50 mADC DSZ, DSX, DSTX, DSTVX, DSY, DSTY, DSTVY, WTE Supply Current 4 to 20 mADC Conditioning of the electrical signal from the strain gauge sensor gives either 010 VDC or 4-20 mA output depending on the model ordered (consult factory for other available outputs). The electrical output is a linear ratio of the pressure sensed. DS series transducers are enclosed in a rugged aluminum housing. A strain...

Open the catalog to page 2

PRESSURE RANGE Full Vacuum to 7,000 psig (483 bar) PRESSURE TRANSDUCERS Example Part Number : YOUR PART NUMBER : DS Section — B Standard Button (Vac to 175 psig) L Compact Package (Vac to 30 psig) T Stainless Steel Durable Media (Vac to 7,000 psig) W Watertight Package (Vac to 175 psig - NEMA4) N 100% Pressure Ends Below Atmosphere P 100% Pressure Ends Above Atmosphere Z 100% Pressure Ends at Zero 8 Full Scale Pressure Must be less than or equal to 7,000 psig E 0 to 10 Vdc I 4 to 20 mADC K 0 to 5 Vdc V 1 to 5 Vdc Z 1.9 TO 9.5 Vdc Electrical Connection Standard Length PS PSI MB Millibars BR Bar KP...

Open the catalog to page 3

DIMENSIONS For reference only Give us a call or visit us on the web O N E P R O D U C T T H O U S A N D S O F WAY S Proportion-Air, Inc. 8250 N. 600 West, P Box 218 .O. McCordsville, Indiana USA 46055 Phone: 317-335-2602 Fax: 317-335-3853 [email protected] Handcrafted in the USA ISO 9001-2008 Certified

Open the catalog to page 4

DS

DS

Catalog excerpts

All Proportion-Air catalogs and technical brochures